Hi everyone,
I would like to try the motor winder on the camera, but to see if it worked and how I tried to use it without connecting it to the camera.
1)is it normal that when I click on the test button not only does the red light turn on but it starts to spin endlessly, the motor no longer stops unless I press the shutter button (but only temporarily) or if I set the switch to OFF
https://www.youtube.com/watch?v=638TF6ylRcE
2) is it possible to try the winder on the camera by putting it in multi exposure mode even without the film inserted? because the zenza bronica when it is without film, to try to simulate a shot you have to lift the lever and set it to multi exposure mode otherwise it is not even possible to reload and activate the shutter.
Hello
i would like to ask how i can scan film negatives with camera ? film are 35mm and 6x4.5mm.
I tried using a vintage 50mm lens with a reversing ring but the focus only allows me to photograph part of the negative. I used a Canon M3 connected to the column of an enlarger.
maybe I should try taking more photos and then merge them, could that be a solution?
I read that I might have to try a 50mm enlarger lens + photographic bellows, could be that a better solution ?
https://www.aliexpress.com/item/4000739111851.html?spm=a2g0o.cart.0.0.378e18fcqLOp5G&mp=1
As a bellows this should be fine right ?