Don Harpold

Hello Rick How did you develop the P30

Hello Mike I checked the Mass develop chart and it showed : Kentmere 100 HC-110 Dil. H 16 min 20C So I went with the shorter time and the Dil. B I will have to try the Dil. H

W/NW Leica IIIg Elmar 5cm 2.8 HC110

Hello First Congratulations Mike and family Here are a couple from the "new" Leica IIIg with a "new" Elmar 5cm 2.8 the film is Kentmere 100 developed in HC110 Dil.B at 72 degrees these came out grainy so not a dilution I will probably use again . The first roll of HP5 did not come out because of the Pyrocat HD I had an issue again, not sure what is going on with that stuff, driver error or??? Sorry just realized these are on another forum so if you peruse that forum don't look :) couple of trash cans lamp and palms Apts

Thanks Dave I appreciate the comments, those are from the plain Rollei 35, it is a verey good little camera, I got mine because Mike has posted some very good photos with his and " I want to be like Mike" :)

Hello Nothing new this week as I have 3 cameras loaded and trying to finish them off. So from the archives Some of these have probably been posted before so if you have seen them sorry Branches Rollei 35 Delta 100 Boardwalk in Alviso CA Rollei 35 Expired Ilford Pan F Birds on a pole RC35 Expired Delta 3200 at 1600 Another boadwalk Hasselblad 500cm probably Delta 100 Downtown LA City Hall Hasselblad Delta 100 And Ronald Reagan at the Library Again Hasselblad Delta 100

Thanks Very nice photos

Hello Question on the Rodinal 1:1, I am not sure I understand that

Hello Here are a few shots from the "new" Petri Color 35 shot with Kentmere 100 developed in Pyrocat HD I have posted a double of an over and under shot. I think the meter is a little off, I thought it was way over the meter was reading f4 to f5.6 and my phone app was getting f11 and f16 at 125 I will run some slide film through it and see how that comes out Anyway Here are a couple Gas station Parking lot and clouds Barnes and clouds And these next two are over then under this is the camera setting under this one I set based on the phone app

Hello Here is a few more from the Agfa Isolette III and Ektachrome 200 water valve Memorial sign Jungle Gym Memorial

Hello Here are a couple from the Agfa Isolette III using expired Kodak Ektachrome 200 Developed by FotoExpress in San Jose, CA Some of the colors may be a bit off and that is due to my poor scanning and post processing More latter creek jungle gym Santa Clara Veterans Memorial

Hello I have a short test roll of Kentmere 100 in a new to me Petri Color 35, if everything comes out good I have a roll of Provia 100 to try next

Hello Sorry, HP5 is the film used, I abbreviated the description as I had posted camera and film info in the prior post in this thread. Yashica Electro 35 GSN model using HP5 developed in Pyrocat HD

A couple more from the Yashica Electro 35 HP5 Edit: I guess the vertical shots need to be sized down a bit to look good in the posts, Sorry Flags Poster this is not a political statement from me Walkway Tree

Hello Here are a few from the Yashica Electro 35 GSN with HP5 and developed in Pyrocat HD I had given up on this camera as I did not like the first roll that came out of it and stuck it in the bottom of the safe. I pulled it out the other day and thought I would try it again so I loaded a roll from bulk and took it out for a quick spin with a short roll, and damn it I like what came out, not sure if it was the film, last roll was Ultrafine Extreme, or the developer or?? Anyway here are a few Lamp Statue Tables and planters Palm trees

Hello A couple more from the Canon P chrome 50mm 1.8 and Film Ferrania brick building Pelton water wheel I have no idea

Hello I have a roll of Delta 400 in the Rollei 35 and a roll of Ektachrome 200 in the Isolette III

Hello A few from the Rolleiflex TLR expired Ektachrome 100 processed by FotoExpress in San Jose, CA and scanned by me. These came out a little under as the meter, Gossen Pilot seemed to be off and then I noticed that needle would follow the match needle when I turned it, like it was magnetized?? If anyone has had that experience let me know, I checked it again later and it seemed ok. These were all in Nevada City CA at a train museum and around town Mike if I am posting too many let me know I have been doing a lot of processing and scanning lately A dark train Tank Junk pile Someones tinmen And one of dad

Hello Here are a few more from the Canon P using Film Ferrania I just got scanned Hello Dave I am in San Jose CA and these were taken in Nevada City CA where I will be retiring to at the end of June. These are in downtown Nevada City Ore cart Old church building now a museum Shaft drill core Large gate valve

Hello Here are a few from the "new" Fujica 35 AutoM, I saw the thread by ?unknown? and had to have one, so I found one for 37.00 on the bay and put a short roll of Kentmere 100 in it and developed it in PyrocatHD This one seems to be in good condition and everything is working. The shots show flashes of brilliance and then mediocrity? I probably just need to work with it as some of the shots came out way under and that is probably because it was bright sun and the meter probably picked up the brightness and so I lost the shadows! Bare tree Planters hard shadows Sign Trash can I don't know Stove under kitchen florescent light only This one a little under in the shadows Sorry for so many

Hello All Here are a few from the Canon P with new to me 50mm 1.8 Canon lens Film Ferrania in Pyrocat HD I have more to scan that I shot at 40iso that are not looking good, I think I was having issues with my meter. Anyway, I have adjusted the gamma on my screen using this site http://www.normankoren.com/makingfineprints1A.html Can any of you tell me if these appear too dark or ok or? I have adjusted to my screen. Thanks in advance sorry for posting so many Don Pipe Store Peeling TJ market Walk Resturant curtain

Hello Here are some from the second Fed2 with a Jupiter 8 Kentmere 100 PryocatHD Chair Tree Fruit tree

Hello Bradley Those are MUCH better. You said that the second highest height setting was best, is that second from lowest or second from top? Thanks Don

Hello Here are a few from the first Fed2 with a Industar 22 Kentmere 100 from bulk in Pyrocat HD I have another roll from the second Fed2 with an Jupiter 8 that I will develop tomorrow? Thanks Don Froggy Wheel Dart Pond Fork

Hello I shot two rolls of Kentmere 100 from bulk in two different Fed2's with different lens. I have a Rolleiflex loaded with Ectachrome 100 and the Canon P loaded with Film Ferrania Don