jonathan_meager Posted February 18, 2010 Share Posted February 18, 2010 <p>Hi,</p> <p>I have just had a 35mm film developed and have been attempting to scan it with the HP G3110 flatbed. <br> The pictures are coming out fine, except that I have blue lines running up each picture emanating from the perforations that are spoiling each photo.<br> I am not sure what I am doing wrong as I have altered resolution etc... </p> <p>Any tips?</p> Link to comment Share on other sites More sharing options...
larrydressler Posted February 18, 2010 Share Posted February 18, 2010 <p>Well this scanner from what I see is not designed to scann negatives and slides. It does seem to have a little built in lighted top for 6 negatives or slides but can't hold them flat.. I would get a thin piece of ANTI-Newton glass to slide in with the negatives to the lid to hold them flatter.</p> Link to comment Share on other sites More sharing options...
evan_goulet Posted February 18, 2010 Share Posted February 18, 2010 <p>Can you post a scan?</p> Link to comment Share on other sites More sharing options...
larrydressler Posted February 18, 2010 Share Posted February 18, 2010 <p>Also a milder fix may be to mask the edge of the scanning area a little with black or white tape..... Just the edges.. where any perforations may shine through.</p> Link to comment Share on other sites More sharing options...
andylynn Posted February 18, 2010 Share Posted February 18, 2010 <p>Sounds like the scanner attempted to self-calibrate by sampling an area it wanted to be blank, but the sprocket hole area of the film was there. Try powering up the scanner and software, and doing a preview scan, without the film in there. Then insert the film and try again.</p> Link to comment Share on other sites More sharing options...
larrydressler Posted February 18, 2010 Share Posted February 18, 2010 <p>Andrew that may work but don't you think Masking the edges may be better in the long run?</p> Link to comment Share on other sites More sharing options...
andylynn Posted February 18, 2010 Share Posted February 18, 2010 <p>Not if it's the calibration thing. I haven't used that scanner but I've had similar problems on other ones and usually they expect some clear space on the glass.</p> Link to comment Share on other sites More sharing options...
larrydressler Posted February 18, 2010 Share Posted February 18, 2010 <p>Yes the calibration area..... I looked at the pictures though did not see one nor did I look to se if it had one mentioned... it would be at the top end.....</p> Link to comment Share on other sites More sharing options...
nickc1 Posted February 18, 2010 Share Posted February 18, 2010 <p>I don't know that model of scanner - but I have the HP G4050 and it would not scan negatives at all well until I changed from the supplied software to Ed Hamrick's Vuescan. A total change! False colours in scans gone and far faster scans as well. I suggest you download the free trial and see if it makes a difference. <br> Nick</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now