john gettis

Just happened to be watching this

Tried to put link but could not figure out how Hope this helps

I had a Norman 200b with lightstand adapters that had one of those there was no pin in any of mine and I bought some new. I found a photo that I hope shows you what it is for IN this photo that hole would be in line with the right

Rice or beans in a Ziplock bag possibly inside of another bag. Like someone said if you travel just take the bag then buy what you need at your destination,

Took another sip of coffee. The pin or bolt I don't think you will find that at at photography store either online or at a brick and motor store. Take it to hardware store perferably One of the smaller ones that still has their hardware in drawers. If you are out of the US be aware that it is not a metric thread.

Not sure if this is a bug or not but I am unable to renew cannot find place to do so but continue to get notices that It is due

<p>I would go with the optical slaves in this case. I have the thesehttp://www.bhphotovideo.com/c/product/63118-REG/Wein_W940001_PN_Peanut_Slave_100.html<br>

They plug right into the side of either a 283 or 285<br>

Just a note though you are having trouble getting them to go off try changing the batteries in the flash. they seem to be sensitive to less then fresh batteries.</p>

<p>Something I ran into when in my local Ikea store<br>

<a href="http://www.ikea.com/us/en/catalog/products/60125785/">http://www.ikea.com/us/en/catalog/products/60125785/</a><br>

Have not purchased it yet but it is on the list for the next trip there. John</p>

<p>Now All I need to do is locate some marbles to put in my camera cases. Thanks John</p>

<p>I use Olympus software to process raw files currenty Studio 2 and Paintshop Pro X3 to finish the files. I have in the past considered buying Elements. John</p>

<p>Some of the software I use allows me to print multiply prints on one page. In Paintshop Pro x-3 in full edit mode once you have image open you select print layout then open templates I found pages with wallets on them with larger photos in "combinations" and just full pages with wallets in "standard sizes" Not sure of what software you are using but hope this helps John</p>

<p>I did some searching when I got home and so far could not find anything else but here is link to someone who may be able to help you<br>

<a href="http://www.flashbulbs.com/index.shtml">http://www.flashbulbs.com/index.shtml</a><br>

Also ran across this but I only read english so I could not figure out page click on third small photo believe that it shows the battery you are looking for but even large verion is too small<br>

<a href="http://www.miau.pt/leiloes/leilao.jsp?offer_id=8081278">http://www.miau.pt/leiloes/leilao.jsp?offer_id=8081278</a><br>

After reading what I could on that page I searched for 22.5 volt batterys and this one seems to be similar to the one in photo<br>

<a href="http://www.batterycentralmall.com/Batteries/Eveready/EV_412.html?ref=sortprice">http://www.batterycentralmall.com/Batteries/Eveready/EV_412.html?ref=sortprice</a><br>

are you sure that it is two batterys or could it be one. Any way Hope this helps John</p>

<p>Some how the link was left out sorry here it is<br>

<a href="http://www.radioshack.com/product/index.jsp?productId=3939580#tabsetBasic">http://www.radioshack.com/product/index.jsp?productId=3939580#tabsetBasic</a></p>

<p>I could not find the dimensions on this battery in the time I had this morning but I used to have a flash gun that used this. If memory serves there was also a 15 volt model. </p>

<p>Try moing them farther apart when I have my cheap radio slaves close together sometimes one does not fire but when they are farther apart they seem to work better. John</p>

<p>Ok her is the image</p>

<p><a href="../photo/11072670&size=md"></a>Riverside California and my current favorite place is The San Diego Wild Animal Park.<a href="../photo/11072670&size=md"></a></p>

<p>Don't know about a repair manual but for instructions check out this site<br>

<a href="http://www.butkus.org/chinon/mamiya.htm">http://www.butkus.org/chinon/mamiya.htm</a><br>

Hope this helps John</p>

<p>I suspect that it is more complicated as there is a circuit board under it. My suggestion would be to contact John Hermanson <a href="http://www.zuiko.com/">http://www.zuiko.com/</a> . this is what I would do in this situation. No connection to him except I am a satisfied customer myself. John Gettis</p>

<p>I have a computer with a raid setup on the computer with 1tb external drive as a backup. I also have a 160 usb powered drive that I copy files to then put back into a firesafe. When that one gets much full I will purchase another. I also have copies on DVD's for the more important files. For most important photos I have another set of DVD's that I keep at my sister's in another part of the state. John</p>

<p>I would use one large bag to keep them together but would put each batch in a seperate but smaller bags. I think that this would protect the rolls better and would also let you label each set as to where and when you took them so you could process the more important ones first. John</p>

<p>Mine would have to be my OM-4t with a 2-13 screen John</p>

<p>Try looking in the applications data folder under your documents. I had this same problem when I first got my Olympus camera. Hope this helps John</p>

<p>You might want to check out this light setup and use you 50 1.8 to begin with.<br>

<a href="http://www.calumetphoto.com/item/CF0502K1/">http://www.calumetphoto.com/item/CF0502K1/</a><br>

I have the 400 watt version of these and they work quite well. Hope this helps John</p>

<p>You might want to check this site out <a href="http://www.petergowland.com/">http://www.petergowland.com/</a><br>

Hope this helps John</p>

<p>You might want to check this out. I don't own one but yet but seems to be a good value for the money considering the cost of the Lasto-lite one.<br>

<a href="http://www.cheetahstand.com/servlet/the-12/Cheetah-Qbox-24-Grid/Detail">http://www.cheetahstand.com/servlet/the-12/Cheetah-Qbox-24-Grid/Detail</a><br>

hope this helps John</p>