custom film holders for fl

<p>You might want to also research cleaning the underside of the print head (folded paper towel soaked with Windex or Simple Green), the wiper at the parking pad and the parking pad/capping station itself. When these parts have excess ink and/or over-spray on them and if your paper is curled you can get ink marks on the paper.</p>

<p>The extra large set of controls that Vuescan has (e.g. locking base color) might give you the tools you need to do the job. Vuescan has a free trial so you can download and experiment with it before buying to see if you can acquire the results you want.</p>

<p>Just to be clear, that profile is for an Epson 3800.</p>

<p>I created one with my i1 Pro for a box of Kirkland made in Mexico. This box of paper has been around for a few years so I don't know if the paper formulation is the same as what you would get in a box bought at Costco today but you might as well give it a test. Send me your email address via private message and I will email it to you.</p>

<p>What color space is your file? Are you using a custom profile for your printer? At what luminance level did you calibrate your montior? How far off are your prints? Prints will never match a monitor exactly since a monitor is backlit and a print is not.<br> <img id="smallDivTip" src="chrome://dictionarytip/skin/dtipIconHover.png" alt="" /></p>

<p>You mentioned Canada. In case you are actually up there, Bob Carnie at Elevator in Toronto is building quite a good reputation: http://www.elevatordigital.ca/<br> <br />Doug</p>

<p>You might go to the compassmicro.com website and look around for parts for your scanner. When you find parts, you will often find links to exploded diagrams. That should help you figure out how to get inside your scanner. For other scanner users, I have put up some dismantling tips for the Vxx line of consumer scanners here:<br> http://www.betterscanning.com/scanning/dismantling.html</p>

<p>If a 1680 is in good working condition and calibration, the final true optical resolution (not manufacturer's claim) of the 1680's scans will probably at least equal the V5xx and V6xx. The dmax should be better to a noticeable degree. LED is nice for faster warm up but in consumer scanners I would be really surprised to see a well executed test that showed the scanned images were significantly better. If a 1680 is working well (it might need a cleaning under the glass by now at the least), I would really be surprised if the Canon 9000 produced a better scan - even with one of my holders. The 1680's optics are in a different class. It all comes down to the performance/condition of your particular 1680.<br> <br />Given your budget of $500, I would look at a refurb'd V700 from the clearance center at the online Epson store. The availability fluctutates daily but I have seen them there in the $400 range. Manage your expectations though and don't be surprised if you don't see a huge gain over your 1680. Watching your local CraigsList could yield an even better deal but there is always a chance you get sold a dud.</p>

<p>>>Luminance: 120<<<br> I think some points of his article are ready for updating. Many of today's better quality LCD monitors can, and need to, be calibrated at a much lower luminance level than 120. I am running my NEC at 90 and it calibrates just fine. Did you try to calibrate lower than 120 and have an error? If you haven't tried calibrating lower, that is where I would start. Try 100.</p>

<p>First, in the software have you change the "thumbnail cropping area" slider from small to midway or large (you did switch the format size parameter in the software configuration box to your particular format though, right?). You will find many references to the poor auto cropping problem on the internet. Many people never realize that they are missing part of their image(s) until they get an obvious error like the one you experienced. If they did a careful comparison of most scans though, they would probably be surprised to find how many of their images on film are overly cropped or mis-cropped by the software's auto-cropping. Auto-cropping is nothing more than a "guess" based on an algorithm and it is often fooled.<br> Most people I know just set a batch scan of manual crops. It is easy to set up and you know it will be accurate. In the end, this actually takes less time because you don't have to spend time doing comparisons of scans to film and then have to do the inevitable rescans. Here is a page of tips I put up to help people learn about creating manual batch scans with the EpsonScan software:<br> <a href="http://www.betterscanning.com/scanning/batchscanning.html">http://www.betterscanning.com/scanning/batchscanning.html</a><br> Doug</p>