dan_belmont Posted May 15, 2004 Share Posted May 15, 2004 Hey if anyone can help me it would be greatly appretiated. Here's my problem: I recently bought an old novatron 440 plus power supply and 3 novatron flash heads with 100 watt modeling lights. The flash heads are rated as follows: 1 480ws 1 240ws and one 120 ws. I paid 1000 for this kit along with 2 large softboxes, and a large hand painted muslin. When I got the kit home I discovered that one of the flash tubes was broken (in the 120 ws light). The modeling light still works fine. My first question is can I replace it with a new head. If so where could I find it and what do I look for as far as compatability goes. The kit is very old,1984 or so... Link to comment Share on other sites More sharing options...
RobertChura Posted May 15, 2004 Share Posted May 15, 2004 <a href= "http://www.novatron.com/"> Novatron.com <a/> Link to comment Share on other sites More sharing options...
aardvarko Posted May 16, 2004 Share Posted May 16, 2004 Hey Dan, I think you'd get a better response if you posted this question six or seven more times. Link to comment Share on other sites More sharing options...
dan_belmont Posted May 16, 2004 Author Share Posted May 16, 2004 I will not post so many times again. I was just feeling kind of stupid for buying such a crappy system without researching it first. I was wondering if any one knew how if I could buy a 1000vr novatron kit and piggyback it to my 440 plus. If so could you please tell me how and what I would need to do it. I really would appretiate any help. Again sorry for the multiple postings. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now