deetailer Posted November 5, 2020 Share Posted November 5, 2020 I picked up a GW670II at an action and am trying to see if it is working right before I actually buy film and try it. With no film the only way I can get the top shutter button to operate is with the back open. With no film the front button does not operate even when un-locked. Is this normal, am I doing something wrong or is it broken?? Link to comment Share on other sites More sharing options...
ajkocu Posted November 6, 2020 Share Posted November 6, 2020 With no film, it is normal for the shutter to operate only with the back open. I don't recall about the front shutter button. I don't have that camera anymore. Good luck and have fun! Link to comment Share on other sites More sharing options...
Niels - NHSN Posted November 6, 2020 Share Posted November 6, 2020 Front and top release should operate the same way, but seriously; don't be cheap, use a test film!! That camera is going to cost you a lot in film and processing in the future - if this camera doesn't work you can reuse the test film in your next camera. If you can't afford to waste a roll of film, you can't afford to own the camera. Niels Link to comment Share on other sites More sharing options...
John Seaman Posted November 6, 2020 Share Posted November 6, 2020 On the similar GW690 without a film, the back needs to be open for the shutter to work. And the two buttons behave the same. I've got a number of scrap films for testing cameras. You can often pick up expired film cheaply on auction sites. Link to comment Share on other sites More sharing options...
peter_fowler Posted November 6, 2020 Share Posted November 6, 2020 ^^ I'm kinda curious how you would reuse a test film ? Peter 1 Link to comment Share on other sites More sharing options...
Niels - NHSN Posted November 6, 2020 Share Posted November 6, 2020 ^^ I'm kinda curious how you would reuse a test film ? Peter Roll it back on the spool. You reuse it for testing, not for making images of course. Niels Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted November 6, 2020 Share Posted November 6, 2020 You reuse it for testing, not for making images of course. So how does just making a camera go 'click' test anything without making an image? The OP says they can already do that with the back open. There are a multitude of things that can be wrong, and that can only (in the absence of proper test equipment) be checked by making actual images with the camera. Focus, correct exposure, light-tightness and frame-spacing to mention only 4 such things. None of those are verified simply by running a dummy exposed film through the camera. However, I agree that if you can't afford to use a roll of film in testing, you probably can't afford to feed that camera. Link to comment Share on other sites More sharing options...
Niels - NHSN Posted November 7, 2020 Share Posted November 7, 2020 So how does just making a camera go 'click' test anything without making an image? The OP says they can already do that with the back open. There are a multitude of things that can be wrong, and that can only (in the absence of proper test equipment) be checked by making actual images with the camera. The text you quote was directed at Peter, not OP. OP can’t do a click test, it obviously doesn’t click when pressing the front release. To rule out Fujica quirks (I own a GL690 so I know for a fact they may have some) you should run a film through it. It is unnecessary to process a film if a click test with a film fails - unless OP is fine with a nonfunctional front release button. Niels Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted November 7, 2020 Share Posted November 7, 2020 The simple expedient of leaving the lens-cap on would enable the shutter button(s) function to be tested with film loaded, without actually exposing the film. That way no exposures would be wasted, and the film could be rewound and reused. Link to comment Share on other sites More sharing options...
peter_fowler Posted November 7, 2020 Share Posted November 7, 2020 ^ +1 . Link to comment Share on other sites More sharing options...
Niels - NHSN Posted November 7, 2020 Share Posted November 7, 2020 The simple expedient of leaving the lens-cap on would enable the shutter button(s) function to be tested with film loaded, without actually exposing the film. That way no exposures would be wasted, and the film could be rewound and reused. Great, you just saved OP 7€ by adding the risk of light leaks in a loosely re-wound film. When he re-use and process that film, it will be useless to verify if the camera has light leaks. Where’s the value in that. Niels Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted November 8, 2020 Share Posted November 8, 2020 ...by adding the risk of light leaks in a loosely re-wound film. Why would it be loosely re-wound? There's always a risk of light-creep past the backing paper of rollfilm. That's why it's advised to load and unload in the shade or in dim light. Personally, I carry strips of kitchen foil in the camera bag to wrap exposed film immediately after unloading. Link to comment Share on other sites More sharing options...
Niels - NHSN Posted November 8, 2020 Share Posted November 8, 2020 Why would it be loosely re-wound? Because we may not all have as well developed fine motor skills as you do? Niels Link to comment Share on other sites More sharing options...
q.g._de_bakker Posted November 8, 2020 Share Posted November 8, 2020 We're talking about little money to test a much more expensive product. Does it really matter? The subject is how to find out whether the camera works as it should, or not. Link to comment Share on other sites More sharing options...
JDMvW Posted November 8, 2020 Share Posted November 8, 2020 Film is not a "pearl of great price" - tho' it's more costly and harder to find than back in the day, START get the manual at Fuji GW690 II Pro / GSW690 II Pro / GW670 II Pro instruction manual, user manual, PDF manual, free manuals or elsewhere (make donation to Butkus) Just pick up some cheap film and try it out.Stop cheeseparing Link to comment Share on other sites More sharing options...
peter_fowler Posted November 9, 2020 Share Posted November 9, 2020 ^ Is "cheeseparing" the same as "cheap-skating" ? Peter Link to comment Share on other sites More sharing options...
peter_fowler Posted November 9, 2020 Share Posted November 9, 2020 I should add , that here in the great white north , a roll of cheap film and developing ( with taxes ) is pennies away from $25.00 . So I hope any and all problems are shown on your first roll . Link to comment Share on other sites More sharing options...
Vincent Peri Posted November 9, 2020 Share Posted November 9, 2020 I should add , that here in the great white north , a roll of cheap film and developing ( with taxes ) is pennies away from $25.00 ... B&H Photo sells Tri-X for $6.49. Dwayne's Photo Lab processes B&W film (35mm) for $7 a roll. Total cost is $13.49 plus sales tax. Nowhere near $25. Link to comment Share on other sites More sharing options...
peter_fowler Posted November 9, 2020 Share Posted November 9, 2020 I guess you missed the part about "the great white north " , here in Vancouver , B.C Tri-x in 120 is $14.00 a roll ! And it costs damn near $6.00 to park to go in and get your film developed ( for you can't imagine how much ) ! I know you're just bragging about how inexpensive it is down below us . The point is , it's not loose change here to use a roll for test purposes . You know that after a while the purchase price of the camera is almost free after a few years of shooting film , up here for sure . Peter Link to comment Share on other sites More sharing options...
Vincent Peri Posted November 9, 2020 Share Posted November 9, 2020 I guess you missed the part about "the great white north " , here in Vancouver , B.C Tri-x in 120 is $14.00 a roll ! And it costs damn near $6.00 to park to go in and get your film developed ( for you can't imagine how much ) ! I know you're just bragging about how inexpensive it is down below us . The point is , it's not loose change here to use a roll for test purposes . You know that after a while the purchase price of the camera is almost free after a few years of shooting film , up here for sure . Peter I'm sorry to hear that. You have my sympathy. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now