jorge-vasconcelos Posted July 19, 2017 Share Posted July 19, 2017 I have some Fortepan 400 to develop but the instruction that came w/ the film is very basic, i need to know developing times w/ Ilford ID11 (didn't find anything on the net) the instruction only says: Ilford 20ºC 10.5 min. Thank you! Link to comment Share on other sites More sharing options...
Greybeard916 Posted July 19, 2017 Share Posted July 19, 2017 Digital Truth suggests stock solution of ID-11, nine minutes at 20c. B&W Film Developing Times | The Massive Dev Chart 1 Link to comment Share on other sites More sharing options...
jorge-vasconcelos Posted July 19, 2017 Author Share Posted July 19, 2017 Thank you Greybeard!!! Link to comment Share on other sites More sharing options...
jorge-vasconcelos Posted July 19, 2017 Author Share Posted July 19, 2017 Ok, developed 2 rolls, came out weak, (i might save some pix when i scan them) (tomorrow). so i thought the time was wrong. went back to instructions and to my surprise "above times are for artificial light only. when exposing film to daylight or with electronic flash increase exposure 1 stop." so i developed another roll and increased development by +- 50%, to 14 min. came out alright. for the remaining 6 rolls i have, i'll set the camera iso 800. Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted July 19, 2017 Share Posted July 19, 2017 Setting EI 800 for a 400 ISO film will underexpose it by a stop, not increase exposure. To increase exposure by one stop you need to set 200 ISO on the meter or camera. Beside which, altering exposure is not the same as altering development. You need to examine the negatives to see if the highlight density and contrast is weak - indicating underdevelopment, or whether the shadow detail is lacking - indicating underexposure. Or you could choose a better quality film from a more reliable maker that supplies comprehensive data on their emulsions. Link to comment Share on other sites More sharing options...
Mike Gammill Posted July 19, 2017 Share Posted July 19, 2017 I don't believe Fortepan 400 is manufactured anymore. Unless you have a large stock (a seller who can supply it) you might eventually look at some other films. But to the original question: google the film and check out the results and responses that others have achieved and use a guide to getting the results you are after. Link to comment Share on other sites More sharing options...
glen_h Posted July 20, 2017 Share Posted July 20, 2017 http://www.jackandsue.com/magazines/photographic/pdf/1992%206%20Forte%20Film%20System.pdf says some things about it, including that it works over a wide EI and development time range. Your light negatives might scan just fine, though it is probably better to increase exposure or development. It also says the same EI value for daylight and tungsten. Many films have a lower suggested EI in tungsten light, though for proper gray tones, filters are recommended. (It used to be clear flash bulbs were used for black and white films, but for some years now, blue bulbs have been recommended, as they are close to daylight in color.) -- glen Link to comment Share on other sites More sharing options...
jorge-vasconcelos Posted July 20, 2017 Author Share Posted July 20, 2017 Correct rodeo_joe, iso 200. yes Mike Gammill, forte closed shop some time ago. as i said i have 6 more rolls of forte pan. i don't remember why i bought these films, i've always used kodak trix and then ilford hp5. thank you glen_h, will look at that! thank you all so much! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now