miss.annette_leigh_haynes Posted December 25, 2016 Share Posted December 25, 2016 <p>Can I use a 58 mm Marco Close-up Filter on a Schneider Symmar 210 mm 1:5.6/360 mm 1:12?<br> Will this work for me or is this a bad Idea? Also any Idea how to attach a Filter to a 127 mm 1:4.7 Polaroid in Copal Shutter ´1</p> Link to comment Share on other sites More sharing options...
User_6502147 Posted December 25, 2016 Share Posted December 25, 2016 <p>If I was you, I'd get one filter or several (+) close up filters (one size) that will fit the largest lens and then get step down rings to fit all other lenses. For instance, you could have a 67mm filter as largest lens and a 67mm to 58mm ring, 55, 52, 49, etc. This way you only have to buy one close up set.</p> <p>Just measure the filter thread for each lens. Those rings are relatively inexpensive.</p> <p>Les</p> Link to comment Share on other sites More sharing options...
Jochen_S Posted December 26, 2016 Share Posted December 26, 2016 <p>Measure the outer diameter of your 127mm and check if maybe the Linhof lens hood with slide in filters could be adapted to it. Or buy matching snap on filters.</p> Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted December 26, 2016 Share Posted December 26, 2016 Close-up dioptres work by shortening the focal length of the lens they're attached to. For example a +1 CU "filter" on a 210mm lens makes a combination with a focal length of (21x100)/(21+100)cm. That's 17.36cm or ~174mm. A +2 dioptre on a 210mm lens results in a combined focal length of 148mm. However, the combination inevitably has poorer optical quality than the prime lens alone, and has a different effective aperture. There's little point in removing half of a convertible Symmar only to replace it with an inferior CU dioptre to reduce its focal length again. Especially since a +1 CU on a 360mm lens gives a combination of around 265mm FL. Link to comment Share on other sites More sharing options...
david_l3 Posted December 29, 2016 Share Posted December 29, 2016 <p>There is no reason to use a Macro Close up filter on your 210mm lens and with the long 26 inch bellows length of your camera. Just rack the bellows out to focus close up. You can of course use 58mm filters for color and contrast changes. <br> I also recommend not to use the lens converted to 360mm. It's very difficult to focus and image quality is poor. I tried one time with a 210mm Rodenstock lens and one time was enough to see it was not worth the trouble for a second attempt. </p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now