silverhalide1949 Posted September 18, 2005 Share Posted September 18, 2005 I just sucessfully developed a 36 exp roll of Delta 400 in XTOL mixed 76/23/04. I mix the 5L and store in 250ml brown glass bottles with saran wrap under the cap. (I use filtered tap water to mix dev.) I must have missed the bottle on the shelf and decided to try it on a roll of film. I placed a section of unexposed film into the diluted (1:1) developer before I loaded the reel. I figured if the XTOL was exhausted I would use a bottle from the fresh batch. At any rate, the unexposed film was black after I finished loading the reels. I then proceeded to develop the roll with the nearly 13 month old XTOL. The resulting negatives are as good as those developed in fresh XTOL. I think this is proof that at the very least my chemical storage method is working. I don't recommend this as a standard practice but it is nice to know it is possible. Until the last Silver Halide Crystal is extinct. RO Link to comment Share on other sites More sharing options...
photojim Posted September 18, 2005 Share Posted September 18, 2005 I wouldn't call it proof, but it is a good sign. Your method could have a 95% failure rate and you could have gotten the lucky 5%. :) Still, it certainly points to the validity of your storage method. The longevity issues seem to be based in iron in the water, so the use of filtered tap water in some locales may not be that successful unless the filtering mechanism eliminates all iron. Link to comment Share on other sites More sharing options...
ivan_dzo Posted September 18, 2005 Share Posted September 18, 2005 I make it with deioninised water from a pharmacist and it easily lasts 12months or longer in brown glass bottles full up. Link to comment Share on other sites More sharing options...
philip pankov - www.philpa Posted September 18, 2005 Share Posted September 18, 2005 For me XTOL lasts easily 12 months in dark plastic bottles filled to the top. I read a lot about other?s problems with XTOL storage, but I have to say it works fine for me.. maybe I have been very lucky? :-) Regards, <br><br> Philip Pankov <br> <a href="http://www.PhilPankov.com/">Pictures of Ireland</a> - Fine Art Black & White Photography of Ireland Link to comment Share on other sites More sharing options...
ronald_moravec1 Posted September 18, 2005 Share Posted September 18, 2005 This is a clip test as known in the industry. When dealing with small volumns, it is invalid as there may be enough capacity to do a short film, but not a full roll. Kodak has told me there is no reliable home test to tell if Xtol is good or bad. Now need a large tank, control strips, and a densitimeter. I`m back to home made D76. Link to comment Share on other sites More sharing options...
rich_ullsmith1 Posted September 19, 2005 Share Posted September 19, 2005 Thank you for the note Robert, as I was just eyeballing a few bottles of xtol in the basement, with some suspicion, and I know they are not six months old. What's a fella supposed to do with five liters of Xtol, especially when you gotta dilute the stuff? Will somebody please call Kodak and tell them . . .ah, never mind. Link to comment Share on other sites More sharing options...
dennis_oconnor3 Posted September 19, 2005 Share Posted September 19, 2005 If 5L offends thee, fill a gallon jug and dump the remainder... denny Link to comment Share on other sites More sharing options...
andrew_hull Posted September 19, 2005 Share Posted September 19, 2005 I store it in used coca cola bottle filled all the way to the top. Last batch ws mixed in May of 2004 (used last week) with no issues. Count me in the Xtol Failure Doubting Thomas Society. Link to comment Share on other sites More sharing options...
dennis_oconnor3 Posted September 20, 2005 Share Posted September 20, 2005 There actually was an XTOL problem in the past, but it was the small packets not the 5L size... Anyway, that has long ago been cured... There will still be failures for the unfortunate photographer who has bad water, or who overheats his water when dissolving the powder (problems for any powder developer)... Use distilled water for mixing the stock solution, use your thermometer for the heating process, and you will not have a problem... denny - who has the worlds worst tap water - it will gag you just running in the sink... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now