joe_hodge Posted February 20, 2020 Share Posted February 20, 2020 What are the chances they fire? What are the chances they START a fire? For now, this is curiosity, but a family member cleaning out old stuff dug up an old 110 camera and a box of flash cubes, and I have a masochistic impulse to try using it. I’m sure I’ll come to my senses soon, but the idea of taking a picture by the light if burning metal has a certain appeal. Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted February 20, 2020 Share Posted February 20, 2020 (edited) I really can't remember if an 'indicator dot' was used with flashcubes, but proper flashbulbs used to have a dot of colour-changing paint on the inside of the glass bulb. If the dot was blue it meant the bulb was good. If pink, the bulb was leaky and risky to use. (If the bulb was brown or black, it meant it was already used!) Cubes were meant to make flashbulb use safer by enclosing the bulb in a tough plastic case that would stop bits of glass flying around if the bulb exploded, and to prevent the risk of people touching a hot bulb after firing. This was really 'belt-and-braces', since flash bulbs were already coated with a tough plastic varnish to prevent them flying apart. Anyhow. I suspect the fire risk from those titchy bulbs is very minimal - as is the amount of light they produce. Unless you have a cube adapter, using those cubes will probably limit you to using a crappy Instamatic camera as well. Edited February 20, 2020 by rodeo_joe|1 Link to comment Share on other sites More sharing options...
Ken Katz Posted February 20, 2020 Share Posted February 20, 2020 Unless you plan on using a flashcube in an "explosive environment" I think you will be fine. Link to comment Share on other sites More sharing options...
glen_h Posted February 24, 2020 Share Posted February 24, 2020 Get an Agfalux C. Well, you probably want more than a few of them for this case. The whole idea is to burn the insides very fast, so they can't really get much worse. They have 100% oxygen inside, as well as I know. If that leaks out, then they won't work well or at all. I have some #22 flashbulbs: #22 Flash Bulb by Westinghouse Package of 6 which are the size of, and the same socket as, household light bulbs. I even have a camera that my grandfather adapted to use bulbs like this, as it has two ordinary 120V electrical outlets attached to it. (Otherwise, an ordinary 116 box camera.) I had an Agfalux C when I was younger, inherited from my grandfather. After I got my Vivitar 283, I took it off the camera strap, and lost it somewhere (maybe in my parent's house). But then I got another one on eBay. I have some other sizes of flashbulbs, too, but haven't gotten around to using them. -- glen Link to comment Share on other sites More sharing options...
joe_hodge Posted June 17, 2020 Author Share Posted June 17, 2020 Just in case anyone was curious, I’ve been defeated in my attempt to use these old flash cubes. I picked up some old 110 film and a sealed “size K” battery from Ebay, loaded it all up in the camera, and...nothing. The battery seems weak on a multimeter, and I’m not paying for another one! Since the cubes (magicubes) are probably bad in any caseI think I’m done here. Link to comment Share on other sites More sharing options...
John Seaman Posted June 17, 2020 Share Posted June 17, 2020 These new fangled gadgets are too complicated. I say, bring back the old flash powder. Link to comment Share on other sites More sharing options...
steve_gallimore1 Posted June 17, 2020 Share Posted June 17, 2020 These new fangled gadgets are too complicated. I say, bring back the old flash powder. Eyebrows are overrated... I've got some bulbs and a nifty little folding Zeiss Ikon reflector, never got around to trying then though. Link to comment Share on other sites More sharing options...
Heritage Cameras Posted June 17, 2020 Share Posted June 17, 2020 Just in case anyone was curious, I’ve been defeated in my attempt to use these old flash cubes. I picked up some old 110 film and a sealed “size K” battery from Ebay, loaded it all up in the camera, and...nothing. The battery seems weak on a multimeter, and I’m not paying for another one! Since the cubes (magicubes) are probably bad in any caseI think I’m done here. If they are indeed Magicubes, then no battery is required. While the original type were fired electrically, these later ones were set off mechanically. If they have any electrical contacts on the base they're flash cubes (which do need a working battery). Link to comment Share on other sites More sharing options...
joe_hodge Posted June 17, 2020 Author Share Posted June 17, 2020 If they are indeed Magicubes, then no battery is required. While the original type were fired electrically, these later ones were set off mechanically. If they have any electrical contacts on the base they're flash cubes (which do need a working battery). This is the camera: Kodak Pocket Instamatic 30 - Camera-wiki.org - The free camera encyclopedia It takes a K battery (which was seriously hard to find and cost more than I'm willing to admit). The cubes are magicubes, so I suppose that the failure to flash is unrelated to the battery. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now