danac Posted September 25, 2021 Share Posted September 25, 2021 (edited) Is it possible to change this lens for a better one? Is it a 39mm mount? Edited September 25, 2021 by danac A book's a great place to hide out in - Trevanian Link to comment Share on other sites More sharing options...
AJG Posted September 25, 2021 Share Posted September 25, 2021 Is it possible to change this lens for a better one? Is it a 39mm mount? I would be surprised if it isn't a 39 mm mount, that has been standard for a long time. You should certainly be able to change the lens to a different one. Link to comment Share on other sites More sharing options...
danac Posted September 26, 2021 Author Share Posted September 26, 2021 (edited) The bellows are attached to the lensboard so it must unscrew without a jam nut but an 800 pound gorilla tightened it. Trying to force it off might make a mess of things. Edited September 26, 2021 by danac A book's a great place to hide out in - Trevanian Link to comment Share on other sites More sharing options...
Gary Naka Posted September 26, 2021 Share Posted September 26, 2021 (edited) The bellows are attached to the lensboard so it must unscrew without a jam nut but an 800 pound gorilla tightened it. Trying to force it off might make a mess of things. I agree, a fixed lensboard is probably threaded. If you can't remove the lensboard, how can you put a locking nut behind it? I don't know who you bought it from, but if possible, I would take the enlarger back, to have THEM remove the lens, and deal with any damage. - I mean you can use a channel lock plier on the lens, but that will very likely marr or damage the lens. - Or try to use a strap wrench or similar on the lens, but you got to be careful to not crush the lens. And if you put that kind of force on the lens, you have to be careful to not torque damage the enlarger head. Edited September 26, 2021 by Gary Naka Link to comment Share on other sites More sharing options...
danac Posted September 26, 2021 Author Share Posted September 26, 2021 I agree, a fixed lensboard is probably threaded. If you can't remove the lensboard, how can you put a locking nut behind it? I don't know who you bought it from, but if possible, I would take the enlarger back, to have THEM remove the lens, and deal with any damage. - I mean you can use a channel lock plier on the lens, but that will very likely marr or damage the lens. - Or try to use a strap wrench or similar on the lens, but you got to be careful to not crush the lens. And if you put that kind of force on the lens, you have to be careful to not torque damage the enlarger head. I'll just leave it as is. I have printed dozens of fine sharp photos with it over the last three years. It is a four element lens made in Japan. If I get in the mood to spend more money the brand new Beseler Printmaker 67 will get the nesessary parts to do 35mm. A book's a great place to hide out in - Trevanian Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted September 29, 2021 Share Posted September 29, 2021 There's an exploded diagram of the Beseler Cadet II that shows no separate, detachable lens board. It also specifies the lens as 50mm f/3.5. So maybe the lens is 'permanently' affixed? That would be an unusual arrangement, but not unheard of. My first Agiscope enlarger had a plastic focussing Helix with a cheap lens moulded into it. Bought out of pocket money - and replaced as soon as I could afford something better. Link to comment Share on other sites More sharing options...
randy_boren1 Posted October 28, 2021 Share Posted October 28, 2021 Have a look at this e*ay listing. Beseler 50mm Cadet II Enlarger with Baseboard Model 3502 No Lens | eBay The seller posted a pix of the lens mounting area showing the retaining ring. Once you remove the lamphouse and crank the lens stage all the way up you should be able to access the ring on your lens. The Beslar lens is an entry level quality lens, ok for 5x7's and maybe uncropped 8x10's once you stop down to f/8 or 11. There are much better lenses for not much money. Nikon 50mm f/4, Rodenstock Omegaron, Schneider Companor, BUT the best lenses are just a few dollars more, Nikon 50mm f/2.8, Rodenstock Rodagons, Schneider Componons, the newer the better. Fuji also makes excellent enlarging lenses, I just don't know the specific names of their line. Most enlarging lens makers have an entry level line and a professional line, always go for the pro line. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now