Henricvs Posted February 5, 2021 Share Posted February 5, 2021 I was gifted two very clean SRT 101 cameras and assorted lenses. Mechanically, these guys are good to go. The meters aren’t really necessary, but I like to make at least some effort to bring them back to spec. The cameras were a little dusty with dead batteries. I dusted them off and plugged in my 675 hearing aid batteries with brass adapter. One of the meters works when I apply pressure to the power disk, the other nuttin. The battery compartments are clean, but I am guessing there may be some corrosion under the hood. Any suggestions or anything that I should look for before I pop the hood on these little tanks? Link to comment Share on other sites More sharing options...
John Seaman Posted February 5, 2021 Share Posted February 5, 2021 (edited) Have a look at this thread - the rotary on / off / BC switch can be the problem, I gave some advice about it here. LINK ------- SRT 101 a dead issue? Edited February 5, 2021 by John Seaman Link to comment Share on other sites More sharing options...
Henricvs Posted February 5, 2021 Author Share Posted February 5, 2021 Have a look at this thread - the rotary on / off / BC switch can be the problem, I gave some advice about it here. LINK ------- SRT 101 a dead issue? Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now