elizabeth_comis Posted October 7, 2010 Share Posted October 7, 2010 <p>What happens if, while processing the solutions are not mixed up and not put in the right order? Will the negatives still turn out? Or is there a way to straigthen out the process?</p> Link to comment Share on other sites More sharing options...
john_shriver Posted October 7, 2010 Share Posted October 7, 2010 <p>Once you put the film in fixer, there's no going back if it's been there more than a minute or two. Stop bath you could rinse off, and then develop.</p> Link to comment Share on other sites More sharing options...
lex_jenkins Posted October 7, 2010 Share Posted October 7, 2010 <p>It's easy enough to find out, and most folks who are new to the darkroom find out within the first few tries before they learn to label their containers clearly. Usually it goes something like this:</p> <ul> <li>"My film came out completely blank. No photos, no edge markings, nothing. Who do I complain to at Kodak/Ilford/Fuji/etc.?"</li> <li>"You fixed your film first. Be sure to label your containers and use each chemical in the correct order: developer; stop bath; fixer."</li> <li>"No, I'm sure I did it correc... oops, you're right."</li> <li>"Welcome to the darkroom."</li> </ul> Link to comment Share on other sites More sharing options...
larrydressler Posted October 7, 2010 Share Posted October 7, 2010 <p>Yep Fixer first is death.. it dissolves all the image away...... No silver salts to save then. And wht do you mean by not mixed up? and are we talking B&W?</p> Link to comment Share on other sites More sharing options...
bruce_erickson1 Posted October 8, 2010 Share Posted October 8, 2010 <p>I once did develop, stop, hypo clear. Forgot fix. I discovered my error and went back and fixed then hypo cleared again. Came out o.k. I have my solution containers numbered now according to their step in the process. </p> Link to comment Share on other sites More sharing options...
daverhaas Posted October 8, 2010 Share Posted October 8, 2010 <p>fixer first is the kiss of death. stop bath first isn't too bad (since it's purpose to "Stop" the previous chemical from working.</p> <p>When I was a newbie in school - the senior photographers thought they'd be smart and relabel the bottle - D76 became "White Lightening" Fixer became 7-up and Dektol became Sprite... That lasted until they messed up 10 rolls of film - ;-)</p> <p>Dave</p> Link to comment Share on other sites More sharing options...
bruce_erickson1 Posted October 8, 2010 Share Posted October 8, 2010 <p>I would have predicted they would stop after someone drank the White Lightening.</p> Link to comment Share on other sites More sharing options...
larrydressler Posted October 8, 2010 Share Posted October 8, 2010 <p>Why that did not stop the South from doing it after the Tax man came. They just invented NASCAR. :)</p> Link to comment Share on other sites More sharing options...
chris_waller Posted October 9, 2010 Share Posted October 9, 2010 <p>Film processing is like the Japanese Tea Ceremony. It is a ritual which must be observed in minute detail. Every night, before you go to bed recite the mantra of Dev, Stop, Fix. Write it on the bathroom mirror. Mix up your chemistry exactly as directed, and store in carefully labelled bottles, where appropriate. Make sure your thermometer is accurate. Stick to an agitation regime. Precision is the keynote. Then practise, practise, practise.</p> Link to comment Share on other sites More sharing options...
johnmyers Posted October 9, 2010 Share Posted October 9, 2010 <p>I never really found a need to label my containers. They each have such a unique odor, plus I simply remember where I put each type. Labeling within type would be a good idea, XTOL vs D76 or something, but I've finally settled on one powder developer so that doesn't really affect me either.<br> As others have said, if you pour in fixer first and don't catch it right away, you're going to lose the roll. If you pour in a stop bath first, just rinse it really well and then put in your developer.</p> Link to comment Share on other sites More sharing options...
kelly_flanigan1 Posted October 9, 2010 Share Posted October 9, 2010 <p>Using "Fixer First" and only makes the film turn clear.</p> <p>It is used to recover the silver off of unused film.</p> <p>Then you use a DC current to pull out the silver</p> <p>Then you try to collect enough silver flake to have a refiner worth their while to refine it</p> <p><img src="http://i4.photobucket.com/albums/y148/ektar/fixer%20and%20dev/DSCN1118FIXER.jpg" alt="" /></p> <p> </p> Link to comment Share on other sites More sharing options...
aslan_ivo Posted October 15, 2010 Share Posted October 15, 2010 <p>As long as you develop before you fix, everything should be fine.<br> <hr> <i>Signature URL deleted per photo.net <A HREF="http://www.photo.net/info/guidelines"><b>Community Guidelines</b></A> - http://www.photo.net/info/guidelines:</i><br> <i>1. No signatures on forum posts. You may not post a block of text or and/or an image and/or your website URL at the end of your posts saying who you are and/or containing a quote and/or other material unrelated to the subject under discussion.<br> 2. Don't post links to your website or online galleries. There's a field in your user profile where you can add your website or gallery URL in case anyone is interested in finding it.</i><br> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now