dan_glaenzer Posted April 7, 2005 Share Posted April 7, 2005 Hello, Im a beginner in taking black and white pictures, the problem is my pirctures turn out too dark. What speed is recomended, and what type lenses to make the picture turn out nice. I have a minotla maxum 7, and have no idea what is best. Any help is greatly appreciated! Thank you very much!Dan Link to comment Share on other sites More sharing options...
anupam Posted April 7, 2005 Share Posted April 7, 2005 Dan, Read a basic book on BW photography - I like Horenstein's book - its referenced on my web site. You are probably underexposing your pictures. So you need to understand the relationship of film speed, aperture and shutter speed. As for recommended film speed and lens - 400 speed film and a normal 50mm lens is nice to start with for handheld out and about shooting. best,-A Link to comment Share on other sites More sharing options...
kaiyen Posted April 7, 2005 Share Posted April 7, 2005 Also - what film are you using? Are you judging "darkness" from prints or scans or what? Are you rating the film at "box speed?" What developer are you using? allan Link to comment Share on other sites More sharing options...
mfophotos Posted April 7, 2005 Share Posted April 7, 2005 I second the Horenstein book. We can't answer your questions very directly, since we don't know what film you are using, shutter speeds, etc. In general, if you are using a modern camera like a Maxxum 7, then the biggest reason for your problem is probably user error. READ, READ, READ about photography. Learn the comtrols on your camera and what they do. There is no reason why you can't run a camera like the Maxxum 7 in auto mode and not get reasonably well-exposed negatives. Link to comment Share on other sites More sharing options...
rich_ullsmith1 Posted April 7, 2005 Share Posted April 7, 2005 Yeah, read the manual if you got it. I'm not familiar with this camera, but having the exposure compensation set to -2 or -3 will give you consistently thin negatives (dark prints). Isolate your problems. Start with the camera. Link to comment Share on other sites More sharing options...
ravi_swamy Posted April 7, 2005 Share Posted April 7, 2005 Are you developing them yourself or using a lab? If yourself then you need to list the film type, the developer, the technique, etc. The ISO ratings for real B&W film (non-C41) are more like suggestions than absolute ratings. In order to get that speed rating you have to use the suggested developer and time. If you use a lab then they are going to develop all B&W the same way. You'll have to figure out the effective ISO by bracketing your exposure and ideally using a densitometer to determine the right exposure.<p>You can do this with your eye but judging exposure from prints is a waste of time. Look at the negatives. Here's a guide <a href="http://www.ephotozine.com/techniques/viewtechnique.cfm?recid=119">Assessing negatives</a> Link to comment Share on other sites More sharing options...
subpopstar Posted April 7, 2005 Share Posted April 7, 2005 Dan - I think many of us here would like to help a beginner, but we need more information to do so. As others have stated, we don't know what film (manufacturer and speed) you're using, whether you're judging negatives or prints, whether you're developing your own stuff or not. If you fill in some of the blanks for us you'll likely get more fleshed-out responses! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now