matteo_rizzi

<p>Once again thank you all for the advice. I will try again with a Delta 100 this evening and hopefully we will have some improvement,<br> Cheers! Matteo</p>

<p>Thank you both,<br> Yes this was 35mm film. TMAX 400-2. I don't know if it was expired or not but I have used expired film before and never seen anything like this.<br> I did have a few issues loading the film on the spool. It took me 10 minutes or so, but I am pretty sure the room was totally blacked out. Also I used latex gloves not to damage the film with fingerprints.<br> I used Ilfotec LC29 10 ml in 290 water. 9 minutes at 20 C , agitating 6 times in the first minute and every 30 seconds after that. I did that by turning the tank upside down and upright again and swishing around a couple of times. <br> I then used Ilford rapid fixer 1:9 dilution, for about 1 minute. then washed with water and wetting agent for another few minutes.<br> This was with a Paterson system 4 tank.<br> After that the film was hung to dry for a couple of hours. I did gently wipe it with clean eyeglass cloth to remove some drops.<br> I can't think of any other details...Thanks again for the replies and suggestions, Matteo</p>

<p>Hi all,</p> <p>This is my first post on this forum. Yesterday I attempted to develop a roll of TMAX 400, it was my first attempt at developing.<br> Film was shot at box speed. I used ilfotec LC29 for 9 minutes at 20 C as per the massive development chart.<br> The results all look like this sample: https://goo.gl/photos/BZkP7c96LZJukD3w8<br> Sample also attached<img src="https://goo.gl/photos/BZkP7c96LZJukD3w8" alt="" /><br> I am not sure what to make of this - something went very wrong somewhere! I am confident in the camera's light seals and meter as I have used it before.</p> <p>Any suggestions are most welcome! Thank you in advance,<br> Matteo</p> <p> </p>