pierre_levasseur

<p>thanks</p>

<p>PL</p>

<p>Wich lense is best and wich is best regarding quality versus price between :</p>

<p><strong>1- Nikon AF-S 300mm f,2,8 D Mark 1</strong><br>

<strong>2- Nikkor 300 F2.8 D ED INTERNAL FOCUS AF-I</strong><br>

<strong>3- Sigma 300 F2.8 SIGMA APO D EX HSM Nikon mount</strong><br>

<strong><br /></strong><br>

regards,</p>

<p>pierre</p>

<p>Hi everybody,<br>

I've always been a fan of Epson printing product. I know have a problem with my R2880 and it need to be repaired.<br>

I tried with the customer support of Epson to find a service center in Montreal or Quebec city but it seems very very complicated for them to help me out on this issue.<br>

I f somebody knows a good place that gives service for Epson printer in Montreal or Quebec city please give me their adress. Toronto can be good too.<br>

have fun with your images!<br>

regards<br>

Pierre</p>

<p>My Epson R2880 dont load paper properly. I tried with paper roll, single 13x19 and 8.5X11 sheets on nothing happening.</p>

<p>Paper enter the printer but always more on the left side then the right side so the printer blocks. I tried to see if there was something on the right side blocking the way but I see nothing.</p>

<p>Any help is welcomed. Hope wont be necessary to go to service with it ($$$).</p>

<p>happy new year to all of you!</p>

<p>Sigma 120-300mm f/2.8 APO EX vs Nikon AF Nikkor 300mm f2.8 AF-I EX.<br>

I've got a deal for the first one of these for 1400$ and the second for 2000$. Wich is the best value at that price?<br>

I'll usethe lense with teleconverter 1.4x and 2.0x.<br>

thanks</p>

<p>here is the solution finally :</p>

<h3><a title="I am receiving a message with the onOne Library and a RED X – Windows only" href="http://www.ononesoftware.com/support/knowledgebase/2010/02/i-am-receiving-a-message-with-the-onone-library-and-a-red-x-windows-only/">I am receiving a message with the onOne Library and a RED X – Windows only</a></h3>

<p><small>February 25, 2010</small></p>

<p>Here is the error window you will see:<br>

Please close all of your applications currently open (Photoshop, etc). To remove this error message, please remove the following two files which are parts to the onOne Library:<br>

onOne Library.dll<br />onOne Library.acel.8bx<br>

These two files help create the onOne menu. These files are in the following location:<br />Windows: \Program Files\Adobe\Adobe Photoshop CS4\Plug-Ins<br>

thanks to all of you</p>

<p>I used the trial version from Onone software to see If I'll find it interresting to buy. After the trial period ended, the One package erase himself from my computer.<br>

Since then my PS CS4 does not work anymore, there is always a message saying : "This application can't start because imsense.dll is not availaible. Reinstalling the application can solve this problem." I tried to reinstall PS CS4 but without success. Still the same problem.<br>

Also, when trying to access anything in the menu bar there is a window that opens and say : "Onone librairy" whit a big X and a small box whit OK in it".<br>

Any idea how to solve this problem? I tried to find where to download imsense.dll but can't find it on the web.<br>

Can anyone make a copy of it and send it to me.</p>

<p>thanks</p>

<p>God! I forgot to check this basic thing : is my paper fitting my printer. The Ilford Classic paper I have is an old batch of paper I had for an older printer.</p>

<p>Thanks to all of you.</p>

<p>I use Windows Vista, PS CS4 with a calibrated (Ione display Xrite) NEC MultiSync P22w and I just bought an Epson 2880 and my paper is Ilford Gallerie Classic Gloss paper.<br>

I tried to find the correct ICC profile on Ilford web site but cant find it. If someone can indicate me where to look I'll be happy. In wich folder should Put the ICC ptofile to make available for CS4 and printer driver?<br>

I would like to know how to set CS4, the printer driver and others to ensure that I print correctly.<br>

Finally, I did install the latest driver for the Epson 2880 but I dont find the software/driver that controls the printer (where I can set the parameter of the printer).<br>

thanks for your help.<br>

Pierre</p>

<p>what i see as exif data for the first image where we see the back of a D200 (pop-up flash) is D200 exposure bias = +/-0EV, light source = unknown, flash = strobe return light not detected<br>

what i see as exif data for the second image where we see only black (SB-800) is D200 exposure bias = +/-0EV, light source = unknown, flash = strobe return light detected<br>

thanks for your help</p>

<p>test 0001 is image metadata with SB-800<br>

test 0002 image metadata with pop-up flash<br>

here is the second file with metadata of image with pop-up flash : </p>

<p>I'm in Aperture mode, like usual form, speed is to 1/60 wich is under the sync. speed so should be ok.<br>

No dirt on the contacts but the contact in the center is lower than the three others, I dont know if it is normal or not. <br>

Communication between the D200 and SB-200 seems ok because when the changing the zoom focal it also changes on the lcd panel of the SB-800 and I also heard it zooming in the head of the SB-800.<br>

I'm shooting a chair in my studio and with SB-800 almost all dark and when using pop-up flash in the same situation image is ok.</p>

<p>I tested everything. I tested the with my 2 D200 and the problems remain the same : images are almost dark output of the flash is not enough. Both D200 are doing well with pop-up flashes.<br>

I reseted my flash a few times, change nothing. I changed the batteries, change nothing.<br>

When using the red button Flash on the SB-800, it goes full blast but not when shooting!!!???<br>

What can I do except sending it for repair?</p>

<p>thanks</p>

<p>I use a D200 with MB-D200, SB-800, Nikkor 85mm AF. My SB-800 is working mad. I use it and all images call total black. Test with pop up flash and images ok, so not the d200. I changed the batteries, reset the unit but nothing seems to amke it worked. Same problem on all modes TTL, AA, M. When using test button it flashes full blast and seems to work.<br>

I also have a new thing on my D200. The code r21 is blinking where the shot number is. I know when this is there it is because the buffer is full but never happen before and dont change the way I shoot? Can it be a problem with my Sandisck cards or something else?</p>

<p>thanks.</p>

<p>My set up is a laptop and my NEC P221W. I use both monitor at the same time. I leave de CS4 interface on the monitor of the laptop then I drag the image I want to work on on the NEC P221W. When in landscape mode and I do full screen mode, the image on the NEC P221W covers all the screen. Then with the PivotPro I switch to portrait mode and now the image only covers 2/3 of the screen. I tried to redo the full screen thing in portrait mode but nothing moves.<br>

I think by default the pixel aspect ratio is set to square, is chaging the aspect ratio is the thing to do. I completely out with this issue...</p>

<p>thanks to Garrison</p>

<p>I use the software PivotPro with my NEC P221W to be able to switch my view to portrait when needed. All my software when monitor in portrait mode will cover the entire surface of the screen but not with CS4. CS4 only covers the firts 2/3 of the screen and I cant find a way to make it cover the entire screen (but ok in landscape mode). I bought this screen especially for it's pivot capability to be able to have my portrait pictures as big as my landscape ones. Please help. <br>

Happy new year to everybody from photo.net.</p>

<p>I have learned today from P.Lavoie that this monitor ( that I have bought) can be calibrated with the Spectraview II and the colorimeter that comes with it.<br>

If I have understand well with that kind of monitor and calibration kit there is no more need in building a profile for the video card because everything is done in the monitor. Am I right?<br>

I did read many reviews and questions on forums about that calibration kit (Spectraview II kit) and many people seems to have experienced problems of bad colorimeter, difficulties to calibrate to obtain the right results. Can you suggest the right worflow to calibrate the NEC P221 vs Spectraview II pro kit and all the do's & dont's.<br>

Also, is removing my actual calibration profile and other things from Pantone Spyder is enough to ensure that the video card isn't sending a profiled signal to the NEC P221.<br>

An happy new year to all of you,<br>

Live long and prosper...<br>

PL</p>