georges_walker

Hi Guys, I'm using the version 1.2.2 64 bit of NX Studio in a Mac M1 Processor. Recently if I try to open a NEF file, the applications displays this message: "No viewable file selected". Some months ago that was not an issue. The only way to open, now, a NEF file is from within the same application as long as the NEF file is inside a Folder within the Nikon Transfer 2 Folder created by the same application. At the present if any NEF file is in a different folder, the application do not recognize it as a RAW. I will appreciate your comments.

Summing up all the wine I've enjoyed ;-)

Thanks, I'll give it a try Happy Merry Christmas !

I know Ayutthaya, it is relatively close to Bangkok, by car should take about two hours if I remember well. Some Japanese organizations such as AOTS and JICA have given plenty of training to people from the Asian Pacific rim, an interesting strategy to spread the Japanese culture of Quality, I believe that new Thai products will hold a quite acceptable level of quality.

You are right, the connector or the port as I know it, is failing. I tried moving upwards and holding in that position and the error, actually the logical disconnection, didn't occur. So I need to manage how to hold the cable in such a way that allows me to retrieve all my files, the disk is a 1Tb and it is almost full. I will consider absolutely your recommendation of buying a USB adapter case, I just need to figure out how to open the current case without damaging the disk.

Hi, Recently the error "Disk not ejected properly" appeared and now I cannot use my WD disk in Mac. I'm using High Sierra 10.13.16, the disk is a WD with native formatting for Mac, it has about 5 years o more. Whenever I plug the disk, the error message is displayed, without removing physically the cable, the message appears and disappears intermittently. Days before I used the Disk Utility app to verify the status of the disk, no errors were reported, everything was fine... I've tried different cables in the same MacBook but the problem is the same. Due to the pandemic situation at Mexico (which is terrible nowadays) I cannot go out to borrow other computers. I will appreciate your recommendations

Andrew, have you ever check in Grays of Westminster? they only sell Nikon equipment, I guess they are located in London. I follow them in Twitter @NikonatGrays Grays of Westminster - Award-winning exclusively Nikon dealer in London | new & second-hand Nikon & Nikkor equipment

This is what I noticed yesterday after testing the mount process and paying as much attention as possible. - lenses used for the test: 50mm 1.4 D, 24mm 2.0 D, 35mm 2.0 D, 85mm 1.8 D, micro 105mm 2.8 N, 18-200 mm DX VR 1st generation - D 300 - D 300s - D 850 When I received the camera, days ago, I only used the 50mm and 18-200mm. I noticed that the mount was too tight, keeping in mind my own experience for interchanging lenses in Nikon cameras. I almost got shock, the day after I had to leave my city, no time for more testing. Perhaps the bad impression kept me away so I didn't make some room in my agenda.... I think I was avoiding the fact, hard to believe it was happening... Yesterday I tried all those lenses, one by one in the three different cameras, looking for the stiffness of the mount in each camera. The both 300 bodies did not show such stiffness but I can tell that every lens feel different in each mount process respectively, regardless of all of them are Nikon and that we are talking about the same F Mount. However I noticed that my 50mm lens makes extra noise at the time of focusing when it is upside down, in any of the three cameras, I think it needs some service, it should be more than 10 years old now, I'm afraid something is not ok with this lens. Every time that the same lens was mounted in the three cameras, the stiffness of the mount in D 850 is noticeable, but I also noticed that by the end, there was less resistance in the D 850 body, seems like something was getting loose. Another thing that catch my attention, was that the micro 105mm was the one with the best smoothness mounting process, very noticeable indeed. So nanocrystal are better not only for the optic quality conditions but also for a smooth mounting process, just kidding As Andrew says, I think that my D 300 bodies with the time have their springs fatigued, that's why I couldn't notice the issue with the 50mm On the other hand, I didn't notice any issue in the focusing process with the D 850, I paid close attention to this topic also with every lens that I used yesterday. So, considering all your recommendations (really appreciated) I called Amazon yesterday asking for a replacement, they said once it is available again, they will deliver a new one. Thanks guys