robbirch Posted February 5, 2023 Share Posted February 5, 2023 I have a Nikon D90 and Godox aD200 pro flash units. I was told I can use the Godox X2T(N) as a remote trigger, which I have. I have set up the flash units and the trigger so they should work, but they will still not fire when the shutter is released. Is there something in the camera menu that I need to adjust before they will work? Any advice would be welcome Thanks Rob Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted February 5, 2023 Share Posted February 5, 2023 The X2Tn should imitate a Nikon speedlight being fitted to the hotshoe. Does the camera shutter automatically switch to 1/60th when the X2Tn is fitted and turned on? If not the contacts on your hotshoe might be dirty or even faulty. Does the camera fire any speedlight fitted directly into its hotshoe? The D90 is pretty old, so if the hotshoe hasn't been used for some time the contacts might well need cleaning. Link to comment Share on other sites More sharing options...
ed_farmer Posted February 6, 2023 Share Posted February 6, 2023 I just started using this set up, with a D750. The Godox units include the ability to set an "ID" in addition to "channel" and "group". I missed this when I first set things up. Make sure that they all match or have "off" in that setting. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now