Matthew Currie Posted January 27, 2016 Share Posted January 27, 2016 <p>I got this very odd mystery lens accessory, with nothing to identify it at all. It says "Germany, " but otherwise says nothing.</p> <p>It has a male 58 mm. thread on the side not shown. The entire assembly rotates, and also the half-sector inside it rotates separately. One half the device is permanently closed, except for a half-circle open in very middle. The little swinging door covers a small hole off center in the part that rotates, and the door has a sharpened edge where it aligns with the edge of the rotating sector. It looks as if it might be some kind of focusing aid for astro photography, but I have found nothing so far. The swinging door covers a diamond shaped hole, but that hole is never fully open, and only meant to allow the hole in the door to show through without requiring precision. It is not possible to have both the center hole and the off center hole open at the same time, which would seem odd if it's an astro focusing device. I hope I've explained it enough. Any clues about what this strange device is?</p> <p>The part that goes on the lens is aluminum, and the rest plastic. There is no room for anything inside it, and no apparent way to attach anything else to it.</p> <p>I got it from a used camera dealer who knows a lot, but also does not know what it is.</p> <p> </p><div></div> Link to comment Share on other sites More sharing options...
jon_shumpert2 Posted January 27, 2016 Share Posted January 27, 2016 <p>Hi Matthew. I am guessing that it could be used to block part of the image for taking multiple exposures. As for the small hole, I think it might be too big to allow pinhole photography.</p> Link to comment Share on other sites More sharing options...
Jochen_S Posted January 28, 2016 Share Posted January 28, 2016 <p>Doppelganger selfie (with timer tripod & multi exposure) aid.</p> Link to comment Share on other sites More sharing options...
Matthew Currie Posted January 28, 2016 Author Share Posted January 28, 2016 <p>Thanks for the above. I see now that Lomo and Vivitar make something similar. I thought of multiple exposures first, but tne odd placement of the holes put me off. I suspect there were a couple of other tricks this could do. </p> Link to comment Share on other sites More sharing options...
henryp Posted January 28, 2016 Share Posted January 28, 2016 <p><img src="http://www.jaycar.com.au/medias/HP1228ImageMain-300Wx300H?context=bWFzdGVyfGltYWdlc3wyMzYzNXxpbWFnZS9qcGVnfGltYWdlcy9oM2EvaDkyLzg4MTQ4MjAzMjc0NTQuanBnfDU0Yjc0YjgzNDk2Y2Q2ZWEzZjBkOGMxZWRkZDg3MTAyMTAxZTE1ODg0Yjg0MDA5NGJlMWMzZDMxMDExNTk4ZWQ" alt="" width="300" height="300" />I thought it was one of these, used on my office desk to corral the computer wires.</p> Henry Posner B&H Photo-Video Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now