3rd party grids for Elinchrom's Rotalux 100x100cm softbox

[PatB]

Hi All,

Has anyone found a good 3rd party grid for their

Elinchrom softboxes? One that could be attached

over the softbox edges with the main diffuser in

place?

Thanks in advance,

Pat

[Jochen_S]

<p>Suggestion: if you posted a picture of your softbox' corner and exact measurements we could maybe be more helpful?<br>

I have Elinchrome hazy lights at home and am using a Yongnuo softbox with grid at work, but that one came as a set, where the difusor sits about 1.5" deep inside the reflector and leaves space to velcro the grid in.<br>

A DIY option: http://strobist.blogspot.de/2006/09/150-no-way-diy-softbox-grid-for-under.html</p>

[michaelmowery]

<p>http://www.lighttools.com Makes the best in the industry</p>

[PatB]

I have actually made that diy grid a couple of years back. It works but is a little fiddly to put on

and sometimes slides off.

The softbox is exactly 100x100cm. The main diffuser is attached on the outer side of the

softbox edge, overlapping the edges so I would need a grid that can be attached along the

outer not the inner edge of the softbox.

I'll have a look at the link as well.

Thanks for all suggestions and ideas

[grid_softboxgrid]

<p>So look grids, which is made to order for Elinchrom Rotalux softboxses 50x130 and 60x80. Design with a reinforcing spring frame and special mounting skirt, cell size 5x5x5 cm, angle is 45 degrees, the cost $105 and $89 respectively<br>

<img src="https://sites.google.com/site/gridssoftbox/home/Elinchrom_Rotalux_50_130_3s_web.jpg" alt="" /> <img src="https://sites.google.com/site/gridssoftbox/home/Grid_Elinchrom_60x80_1_web_S.jpg" alt="" /><br>

</p>