boris_weinfass Posted July 19, 2015 Share Posted July 19, 2015 Hey I have a problem with my Mamiya645 I inserted a film and it winded it to the end So I tried without a film and it won't shoot. Just try to wind Any technicians here know what could cause the problem? Thanks Link to comment Share on other sites More sharing options...
peterbcarter Posted July 19, 2015 Share Posted July 19, 2015 <p>This is normal operation. You need to put it in multi-exposure mode (near the bottom-right-rear side). Just remember to put it back before you shoot your next roll. :)</p> Link to comment Share on other sites More sharing options...
boris_weinfass Posted July 19, 2015 Author Share Posted July 19, 2015 I tried to switch it to multi and back and it keeps doing the same. Before the problem it would just shoot when the back is disconnected Link to comment Share on other sites More sharing options...
Dustin McAmera Posted July 19, 2015 Share Posted July 19, 2015 <p>Not a technician, just another owner. <br> My Pro, with the back removed, will fire its shutter, and you can watch the blinds move back into the cocked position (as you know). It looks like your camera (or maybe the winder) can't tell whether there's a film there or not, and it's trying to wind to frame 1.<br> I notice that you have the WG401 winder; my winder is a 402, so has a position on the shutter button marked 'Start' for winding to frame 1 with a fresh film. I <em>guess</em> this is an automatic function with the 401? Could it be that the winder has simply lost good contact with the body? Try taking it off and wiping the electric contacts on the winder and body. That's all I can think of. Good luck!</p> <p> </p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now