Miha Posted October 25, 2011 Share Posted October 25, 2011 <p>I have some experiences wet cleaning the sensor of my D200 camera. I also have left some of the old Eclipse liquid. Now after more than 1 year of use there are some specs on the D300s sensor (my other camera) I want to clean. I have read many different opinions on the use of the old liquid on the new sensors. What do you think ? Is it safe ? What about usnih methylacolohol - methanol ? According to the photosol MSDS (saftey sheet) the liquid is 100% methanol. What are your experiences ?<br> Thanks for your help. Have a nice day (or night if you prefere it).<br> Regards, Miha.</p> Link to comment Share on other sites More sharing options...
wpahnelas Posted October 25, 2011 Share Posted October 25, 2011 <p>the D200 sensor is CCD type, while D300's is CMOS. my understanding is the formulation of cleaning solution differs for each type. you should consult the website of Eclipse for the correct product for your camera. otherwise you are taking a big chance with your gear.</p> Link to comment Share on other sites More sharing options...
fotolopithecus Posted October 25, 2011 Share Posted October 25, 2011 <p>You're fine using the eclipse, especially when cleaning the sensor as infrequently as you apparently do. I suggest getting yourself some of those Copperhill sensor swabs if you don't have them though.</p> Link to comment Share on other sites More sharing options...
curt wiler Posted October 25, 2011 Share Posted October 25, 2011 <p>Why take a chance, its not that expensive. The recommended solution is Eclipse E2 for the D300 and similar generation sensors for good reason. You can use E2 on the D200, but not the original solution is <strong>not</strong> recommended on the D300.</p> Link to comment Share on other sites More sharing options...
Miha Posted October 26, 2011 Author Share Posted October 26, 2011 <p>Thanks for your answers.<br> @Curt: there is no Eclipse E2 on the photosol page so is it realy a different one ? There is no refference considering the 'old' solution.<br> Regards, Miha.</p> Link to comment Share on other sites More sharing options...
fotolopithecus Posted October 26, 2011 Share Posted October 26, 2011 <p>I was told by Copperhill about a year ago that the only difference between the two formulas is that one is diluted with distilled water, which can leave streaks. I have used the regular Eclipse on my D300 numerous times without any problem. I also recall them saying that some kind of testing had confirmed that it was perfectly safe to use the full strength Eclipse. Given that you only clean the sensor infrequently I really doubt you need to be concerned. I'd recommend trying air or the specialized brushes on it first just in case going to the bother of a wet cleaning isn't needed.</p> Link to comment Share on other sites More sharing options...
tom_boston1 Posted October 26, 2011 Share Posted October 26, 2011 E2 is ethanol based instead of methanol. Use E2 for your sensors. Save the original Eclipse for cleaning lenses. Link to comment Share on other sites More sharing options...
fotolopithecus Posted October 26, 2011 Share Posted October 26, 2011 <p>Well for what its worth, I just checked the Photosol website, and they appear to only sell regular Eclipse at this point.</p> Link to comment Share on other sites More sharing options...
tom_boston1 Posted October 26, 2011 Share Posted October 26, 2011 <p>I asked Photographic Solutions about it through their <a href="a href="http:/www.photosol.com/store/pc/contact.asp">contact form</a> and they responded within a couple of minutes saying "E2 is discountinued. Eclipse is safe for all cameras". However, I do remember them once saying that the original Eclipse should not be used on certain sensors.</p> Link to comment Share on other sites More sharing options...
tom_boston1 Posted October 26, 2011 Share Posted October 26, 2011 <p>Okay, I guess the old "wisdom" about E2 no longer applies. Link <strong><a href="http://www.dmcphoto.com/Articles/SensorBrushes/">here</a></strong> says Photographic Solutions studied the situation for two years and decide the original Eclipse is safe for all sensors after all.<br /><br />As long as they still have their CCD Sensor Guarantee, I guess the Eclipse is alright.<br /><br />With respect to the original poster, I wonder if it makes sense to buy some new Eclipse, just in case your old bottle has become contaminated.</p> <p> </p> Link to comment Share on other sites More sharing options...
dennis_maisel Posted March 21, 2012 Share Posted March 21, 2012 <p>In my search Eclipse 2 is no longer. I have been cleaning my D300s sensor with just Eclipse and the overpriced Sensor Swabs this company also makes. I usually follow the routine that Thom Hogan has explained. <br> http://www.bythom.com/cleaning.htm <br> Be very careful to not touch the sides. You could pick up oil an transfer it to the area you're cleaning. Here's another useful link explaining or clarifying the Eclipse 2 situation.<br> http://www.earthboundlight.com/phototips/indium-tin-oxide-sensor-cleaning.html</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now