j_muro Posted August 11, 2010 Share Posted August 11, 2010 <p>Hi Rollei experts,<br /> I just got this Rollei original camera and I cannot figure out if it is a special model, a prototype, or some sort of adaptation that someone made to the camera. Please look at the pictures and notice the top right corner, it has what looks like a flash connector, right?<br /> Also, there is some sort of connector on the bottom left, right below the lens, not sure what this is.<br /> Can anyone tell me if this is original, and if it is a special feature of this model, or maybe some adaptation, even though it looks too clean to be an adaptation.<br> Thanks</p> Link to comment Share on other sites More sharing options...
patrick_j. Posted August 11, 2010 Share Posted August 11, 2010 <p>Where did you post the photos?</p> Link to comment Share on other sites More sharing options...
j_muro Posted August 11, 2010 Author Share Posted August 11, 2010 <p>Trying to upload</p><div></div> Link to comment Share on other sites More sharing options...
j_muro Posted August 11, 2010 Author Share Posted August 11, 2010 <p>Another one</p><div></div> Link to comment Share on other sites More sharing options...
patrick_j. Posted August 11, 2010 Share Posted August 11, 2010 <p>hello jaime -- thanks for uploading the images. i unfortunately am not familiar with this camera, so i can't help you with it. good luck though!</p> Link to comment Share on other sites More sharing options...
j_muro Posted August 11, 2010 Author Share Posted August 11, 2010 <p>Thank you for checking it out though!</p> Link to comment Share on other sites More sharing options...
JDMvW Posted August 11, 2010 Share Posted August 11, 2010 <p>From the serial number, etc., this looks to be a late model Rolleiflex I (original). If it is it may take 117 film, unless modified to take 120, as some were.</p> <p>A flash pin was a common addition to many older cameras, and probably has nothing to do with the original model type. I am sure someone who really knows this stuff will chime in here, but this is a nice camera -- the flash connection may actually lower its collector value. Again, the experts will tell us.<br /> To make it a little easier for someone who does know older Rollei models here are the pictures reduced in size to fit and slightly enhanced in PS.</p><div></div> Link to comment Share on other sites More sharing options...
leicaglow Posted August 11, 2010 Share Posted August 11, 2010 <p>Neat camera. I don't see an exact match on this page, but it might help in dating it: http://www.collection-appareils.fr/general/html/listeQ_imagettes.php. Looks like ca. 1929 range.</p> Link to comment Share on other sites More sharing options...
j_muro Posted August 11, 2010 Author Share Posted August 11, 2010 <p>Thank You for your comments and the link (and of course reducing teh size)<br> I will continue to wait to see if someone can tell for sure!</p> Link to comment Share on other sites More sharing options...
dave_zoll Posted August 12, 2010 Share Posted August 12, 2010 <p>Rolleiflex Original model, variation 613 I believe. Flash connector a later add on.</p> Link to comment Share on other sites More sharing options...
paul_wheatland Posted August 12, 2010 Share Posted August 12, 2010 <p>Serial number chart taken from Ian Parker's Rollei Guide book, your camera is 1930 model K1 611/612 with non factory synchronization installed by independent repair facility. Filter size is28.5mm push-on. Check on two features: strap lugs cast are early, formed brass are a bit later. Early back has no hinge, falls in your hand, later model has hinge. By the way 117 film is short roll, small spool ends, wooden shaft. It is impossible to use 120 spools, you cannot close the door. You can however use 620 spools. I've seen reference to 120 spooled film use, NOT POSSIBLE! I hope this information helps. By the way, my camera took beautiful color photos, uncoated lens causes soft blending of the colors not possible with newer coated optics by Zeiss.</p> Link to comment Share on other sites More sharing options...
j_muro Posted August 12, 2010 Author Share Posted August 12, 2010 <p>Thank You Paul!<br> Now I know what I have. I have a question for you: I was thinking about replacing the leather, but I am afraid that that may reduce its value, then again I have no idea of the actual value because I did not find anything similar on ebay. So, the question is whether is a good idea to replace the leather.<br> Thanks again</p> Link to comment Share on other sites More sharing options...
richard_oleson Posted August 15, 2010 Share Posted August 15, 2010 <p>I would not replace the leather.... just clean it up and give it a bit of black shoe polish.</p> <p>What I think you're referring to as the other connector below the lens is the cable release socket on the shutter. This was standard equipment.</p> Link to comment Share on other sites More sharing options...
photoyann10 Posted August 17, 2010 Share Posted August 17, 2010 <p>Hello from France,</p> <p>This original seems old. How is the mirror ? If the mirror is original, there is a date written on the back (like 04/29 for instance). It's an old model sure with this serial number.<br> Note you need 24 mm filters (push on), not 28,5 mm as the Parker tells.<br> You can use 120 roll film by cutting with a pair of scissors the 2 plastic ears of the roll.</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now