peter_macejka Posted July 21, 2010 Share Posted July 21, 2010 <p>I've been looking at MIS Black Only inks for home printing, and I'm getting a bit confused with what the best set-up is.<br> Since I last researched this, they they have come out with the Eboni-6 ink set. Reading the info on the MIS (inksupply) site and the info provided by Paul Roark it seems the Eboni-6 inks in a epson 1400 printer are the best set-up because the 6 inks provide very smooth prints; but within the same info it also says the epson R800/R1800 with its 3 black only inks provides the most neutral print. In your opinion whats the best set-up?<br> Does anybody know if you could use the Eboni-6 inks in a epson R800 printer?<br> Can you give me your opinion or experiences with either or both of these set-ups? I'd like to hear alternative set-up suggestions as well.<br> Have a good night, I'll check back tomorrow.<br> Many thanks.<br> Peter</p> Link to comment Share on other sites More sharing options...
peterbcarter Posted July 21, 2010 Share Posted July 21, 2010 <p>I can only comment on what I have experienced. I went for the 1400 and the Ebony-6. I have no regrets. My wife looked at me strangely as I unpacked a brand new printer and threw away the colour carts that came with it.</p> <p>The ink is efficient and doesn't seem to even want to clog the printer. I have gone 6 months with out doing a print. Just cycle the heads and away we went.</p> <p>One thing I will say about Paul's comments. It will work (and well) on gloss and mat. Your biggest issue would be learning QTR to make it all work.</p> <p>have fun!</p> Link to comment Share on other sites More sharing options...
roger_smith4 Posted July 21, 2010 Share Posted July 21, 2010 <p>I'd sell the inks on Ebay rather than throwing them away : ) They're valuable!</p> <p>What's your goal? Paul has a 1400 inkset that's a little more complicated but supremely flexible as it can do minor toning, print on matte and glossy and has gloss optimizer to eliminate gloss differential on gloss-type paper. The Eboni-6 is for the ultimate in longevity as it is just carbon without toners to make the image more neutral. </p> <p>R800/R1800 3MK is a bit rough for my tastes, at least with my R1800. For many pictures that's okay, but I was printing images shot in fog with large smooth expanses and it really looked very grainy. </p> <p>You can physically use just about any inkset in any printer, but you'll need to figure out how to use QTR to translate the settings from one printer to another. I found the program baffling and gave up. Try the digitalblackandwhitetheprint yahoo group for more detailed answers than you'll get here.</p> Link to comment Share on other sites More sharing options...
peter_macejka Posted July 21, 2010 Author Share Posted July 21, 2010 <p>Thanks Peter & Roger.<br> I'm planning on using the printer mainly for matte paper, but printing to glossy would also be desirable.<br> What i'm really after is the ability to print totally neutral prints, that will last a long time.<br> Could you tell me what papers your using?<br> Roger, did you move to the 1400 printer with-out using QTR, or is that the only option?<br> I'll check out the yahoo group today.</p> <p>Many thanks.<br> Peter</p> Link to comment Share on other sites More sharing options...
peterbcarter Posted July 21, 2010 Share Posted July 21, 2010 <p>I use Epson Primium Photo Paper Semi-Gloss and Premium Presentation Paper Matte. I set the QTRGui up as follows.....</p> <p>The printer is set to Quad1400 MIS (yes I am still using Eboni-6)</p> <p>The curve setup for gloss is PK-Kirkland-Glossy-B0 and Matte is MK-PremierArt-MatteBW-B0</p> <p>Under advanced adjustments use -6 for ink limit, -10 for gamma and adaptive hybrid.</p> <p>Now I have a calibrated monitor with a colour of D50 and gamma of 1.8 and a make sure to use a GreyGamma 1.8 profile on my tiff to print.</p> Link to comment Share on other sites More sharing options...
roger_smith4 Posted July 21, 2010 Share Posted July 21, 2010 <p>I ended up moving back to my Epson R220 with the UTR2 inkset as I figured out I can print 8x12 on it by specially cutting the paper. My R1800 is dedicated to color now. The R220 is pretty stable (prints in a south-facing window look and measure well going on 2 years), easy to use (Epson driver) and I can tone prints by putting warm inks in the M, LM spots and cool in the C, LC spots. If I were going to get a printer today I'd go with the 1400 and more flexible MIS inkset and use the QTR presets and the Epson driver. QTR isn't hard to use when everything is set for you, but not fun to try to figure out how to make an inkset work.</p> <p>For paper I'm partial to Innova Smooth White 315 for all my B&W needs. It's stiff enough to mount well, has reasonably deep blacks, doesn't scuff that easily and comes in many sizes. It works well with Eboni. Also try Museo Silver Rag for gloss-type prints that you want to tone warmly.</p> Link to comment Share on other sites More sharing options...
peter_macejka Posted July 22, 2010 Author Share Posted July 22, 2010 <p>Thanks again guys.<br> Peter, can I ask you if you consider the MIS UT-14 inks better than the ebony-6 for the 1400 printer? You say your "still using Ebony-6".<br> Thanks,<br> Peter</p> Link to comment Share on other sites More sharing options...
peterbcarter Posted July 22, 2010 Share Posted July 22, 2010 <p>Peter, I am still using Eboni-6. I have never used the MIS UltraTone-14, or any other quadtone ink set. I bought the "kit" and it takes quite a few prints to use that up.</p> <p>I am happy with my results and that is all I can say.</p> Link to comment Share on other sites More sharing options...
roger_smith4 Posted July 22, 2010 Share Posted July 22, 2010 <p>I tried to spell out the differences above. Better depends on what you want to achieve. Do you want the ultimate in longevity and don't mind using different papers to get different tones? Get Eboni 6. Do you want versatility and the ability tone prints slightly warm or cool? Get UT-14. </p> <p>Either can make great prints.</p> Link to comment Share on other sites More sharing options...
peterbcarter Posted July 22, 2010 Share Posted July 22, 2010 <p>Well it seams that you have some choices to make, and you pretty well have enough info to go.</p> <p>As far as the 1400, Paul was bang on. A Friend of mine has a 3800 and the print quality is remarkably close (my opinion the 1400 is marginally better). I did prefer the blacks of the eboni over the epson. Sure, no roll feeder firewire or ethernet. Oh well.</p> <p>Don't sweat the inks. Just pick one set and go. That is something you can always change later on.</p> Link to comment Share on other sites More sharing options...
peter_macejka Posted July 22, 2010 Author Share Posted July 22, 2010 <p>Your info & opinion's are much appreciated. I put an order in for the 1400 yesterday, with the $120 rebate its just $430(AUD). I'm going to get the MIS CFS for the 1400 with Eboni-6 inks, and see how I go.</p> <p>Now I just have to decide if I put in an original set of inks to test the printer or take a plunge and go for the cfs straight away.</p> <p>Thanks again.<br> Peter</p> Link to comment Share on other sites More sharing options...
peterbcarter Posted July 22, 2010 Share Posted July 22, 2010 <p>Good luck!</p> Link to comment Share on other sites More sharing options...
Greg Fight Posted July 23, 2010 Share Posted July 23, 2010 <p>Peter M.:<br> "Now I just have to decide if I put in an original set of inks to test the printer or take a plunge and go for the cfs straight away."<br> Put in the color carts and play a little. The 1400 makes excellent color prints.</p> Link to comment Share on other sites More sharing options...
roger_smith4 Posted July 23, 2010 Share Posted July 23, 2010 <p>I am not sure but think there may be some incompatibilities between the Claria based dye inks and the MIS pigment? I'd go straight for the CFS and try to get it to work while everything is still under warranty. You can perform tests with B&W ink, too.</p> Link to comment Share on other sites More sharing options...
peter_macejka Posted July 23, 2010 Author Share Posted July 23, 2010 <p>Thanks Greg, but i'm not really interested in any color printing right now. Sorry for not making myself clear. The reason I was thinking of putting in the original set of inks was in case the printer is faulty. I've read some reports of epson not honouring the warranty if third party inks are used. Others say there's a way around it.</p> <p>Roger, I think for the moment I plan on using the CFS with the ebony-6 inks straight away. I don't really want to clean the printer before I get to print B&W.</p> <p>Thanks again.<br> Peter</p> Link to comment Share on other sites More sharing options...
roger_smith4 Posted July 23, 2010 Share Posted July 23, 2010 <p>They'll honor the warranty (I used it with an R1800). Just load color carts before sending it back.</p> Link to comment Share on other sites More sharing options...
peter_macejka Posted July 27, 2010 Author Share Posted July 27, 2010 <p>Hi</p> <p>Can anyone tell me if a 1400cfs/cis would fit an epson 1410 printer?<br> Is the 1410 the same as the 1400?<br> I have posted this question separately, but thought to try here as well.<br> Thanks for your help.</p> <p>Peter</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now