Jump to content

sRAW problem - white dot/hot pixel


kim yee

Recommended Posts

<p>I have used sRAW setting in my 5D2 last week to take some photos of a dog.<br>

Upon opening in DPP in my mac, I saw that there's a hot pixel on the dog ear. Prior to this, I have never shoot in sRAW before and I have had no problem what so ever in RAW format.<br>

I took some black photo with the lens cap on, and the pixel is there too (still in sRAW). However, when I took RAW, it's gone again.<br>

Is there a problem with my sensor? or is this somekind of problem witht he sRAW processing? I did a recovery method popular on the net by asking to do a manual sensor cleaning process and leaving the camera in taht mode for 1 mins before switch off and on again. It does clear the problem, but I would like to know is this a common issue with sRAW? or I should stay away from it forever?<br>

Does anyone has this problem, and does the problem revisit after the sensor cleaning method is employed?</p>

<p>Thank you.</p>

Link to comment
Share on other sites

<p>Hi Yee,</p>

<p>I don't know that much about the 5DII, perhaps others can help you better. But I can think of a test you could do: can you shoot SRAW + full-resolution JPEG at the same time? Does that give you a hot pixel in the SRAW but not in the JPEG? That would certainly point to some error in the internal processing.<br>

Other things that can shed some more light on this: Did you try different raw converters than DPP as well? Do you have the latest firmware on your 5DII? Does it happen at all ISOs?<br>

good luck pinpointing the problem, Allard</p>

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...