jeffrey_e Posted August 13, 2008 Share Posted August 13, 2008 I recently shot a few rolls of Agfa APX 400. All of the images are portraits of fair complexioned Caucasians. I am wondering whether anyone has any advice as to processing chemistry and times. I was planning to do them with D-76 for 12 minutes but I thought I would ask whether anyone had any better ideas. Any thoughts would be most appreciated. Thanks in advance. Link to comment Share on other sites More sharing options...
iliafarniev Posted August 13, 2008 Share Posted August 13, 2008 Rodinal used to be best for Agfapan films. Link to comment Share on other sites More sharing options...
User_502260 Posted August 14, 2008 Share Posted August 14, 2008 When Agfa changed its 400 speed b&w film to APX 400 it looked more grainy to me. If you shot 35mm APX 400 then using Rodinal is only good if you really like more grain. If you shot the film in 120 size and are not going over 11X14 then Rodinal will show more grain but the look is still nice. Shoot a test roll of the film before you develop the portraits. Try it in D-76. If you like the result then you can develop your other rolls. Link to comment Share on other sites More sharing options...
stephen sullivan Posted August 14, 2008 Share Posted August 14, 2008 I'll 2nd Jeff Adler. APX 400 is very grainy. If you use D-76 use it as stock or no more than 1:1 dilution. If Rodinal, I wouldn't dilute more than 1:25 Link to comment Share on other sites More sharing options...
stephen sullivan Posted August 14, 2008 Share Posted August 14, 2008 A. APX 400 in D-76 1:1 @ EI 400<div></div> Link to comment Share on other sites More sharing options...
stephen sullivan Posted August 14, 2008 Share Posted August 14, 2008 B. APX 400 in D-76 1:1 @ EI 400 Please excuse my lack of dusting and spotting. Just haven't got around to it yet.<div></div> Link to comment Share on other sites More sharing options...
stephen sullivan Posted August 14, 2008 Share Posted August 14, 2008 I'm looking at the .pdf for Agfa Pro (films) APX 400 @ EI 320 in Rodinal @ 20c: 1+25 10MIN and 1+50 30MIN (Yes, that is what it says 30MIN.) APX 400 @ 400 in D-76 @ 20c for 12MIN D-76 Stock for 12MIN compared to Rodinal 1+25 for 10MIN, that seems to be a bit long for D-76 Stock. Link to comment Share on other sites More sharing options...
larrydressler Posted August 15, 2008 Share Posted August 15, 2008 Hc110 Dilution B is nice with it or Dilution H if you wish longer times. I find it not bad with grain but in Rodinal the grain is there but tack sharp. Link to comment Share on other sites More sharing options...
georg_kern Posted August 15, 2008 Share Posted August 15, 2008 Adox ATM49 (former Calbe A49) is by far the best suited developer for APX400. It is somehow related to the old Agfa Atomal (based on a p-phenylenediamine derivative), which itself was highly recommended for ASA-400 Agfas back in his days. It is the only developer (AFAIK) that gives full speed with APX400, has compensating characterics, and is fine-grained with good sharpness (although APX still won't be as fine-grained as Tri-X, e.g.). Use it diluted 1:1 for the recommended time. Really. Use it. You can't do better for portraits on APX400. APX400 is not-so-great in other developers (much grain, few shadow detail); Rodinal is good only when you want maximum grain with good acutance. But then, it will give you only 200-250 ASA. Regards Georg Link to comment Share on other sites More sharing options...
jeffrey_e Posted August 15, 2008 Author Share Posted August 15, 2008 Thanks very much indeed for all these responses, and in particular to you Stephen for making the effort to post your photograph. From what I've learned here, I suspect that Rodinal is likely not going to work for me as well as D-76 for 12 minutes. I don't dislike grain in portraits, but I don't know that tack sharp grain will do for this set. My subjects are a young and very attractive couple, and she is expecting their first child. I had the notion that the classic look of black and white would be something that they might like. II did a few rolls of the Agfa and one roll of HP5+. From what I see here, I think that I'll do fine with D-76. Thanks again to you all. One last question: Does anyone have any thoughts as to whether 12 minutes is the right time? I used TTL metering placing the lit skin tones in Zone IV as is my wont. I will likely print using both diffusion and condenser enlargers and print on Ilford's Multigrade RC (at least to start). Link to comment Share on other sites More sharing options...
jeffrey_e Posted August 15, 2008 Author Share Posted August 15, 2008 As a further aside, I very much like the tonal range of your photograph Stephen, and so I'm thinking that D-76 is the right developer. I do however wonder whether it should be stock or 1:1. Anyone have any thoughts? Link to comment Share on other sites More sharing options...
jeffrey_e Posted August 15, 2008 Author Share Posted August 15, 2008 Georg: I didn't see your answer when I just posted. I've never used Adox developers, you've just given me something to look into. Do you have any examples of APX 400 in Adox that you can point me to? Link to comment Share on other sites More sharing options...
stephen sullivan Posted August 16, 2008 Share Posted August 16, 2008 I'll post just for fun: APX 100 in D-76 1:1 @ 20c. Late Winter 2008 in the Cascades. North Bend, WA- Mt. Si<div></div> Link to comment Share on other sites More sharing options...
stan_belyaev Posted August 19, 2008 Share Posted August 19, 2008 Apx400, EI400, D76 stock solution (fresh), t68, 11-11.5 min., agitation every 1 min. avoid using old d76 solution, it may give very high contrast Link to comment Share on other sites More sharing options...
jeffrey_e Posted August 22, 2008 Author Share Posted August 22, 2008 Thanks to all who responded, your assistance is really greatly appreciated. Stan, the photograph you linked to is very fine indeed. I'll try to post a picture as soon as I can process and print. Thanks again, you folks are just great. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now