tom_aellis1 Posted January 22, 2009 Share Posted January 22, 2009 <p>Good day.<br>I'm a dSLR photographer just re-entering the Med Format world. I've always sent my film to A&I for development but I'd like to learn film development.<br>I live in Central NJ, can go into NYC or Phila and would like to find a place that can give a lesson on building a moderate darkroom (Bathroom) and learn developing 120 film.<br>Can anyone please suggest.<br>Thanks so much.<br>Tom</p> Link to comment Share on other sites More sharing options...
SCL Posted January 22, 2009 Share Posted January 22, 2009 <p>Try your local community college for a course in photography and darkroom. Developing 120 film technique, IMHO, is no different than 35mm film after you get it loaded onto a reel, at least that has been my experience.</p> Link to comment Share on other sites More sharing options...
jack_welsh Posted January 22, 2009 Share Posted January 22, 2009 <p>When i started over 30 years, ago. For B&W at least. I just bought some chemicals, a book and taught myself.</p> Link to comment Share on other sites More sharing options...
steve_bellayr Posted January 22, 2009 Share Posted January 22, 2009 <p>Try Bergen County Camera in New Jersey. When I was in school 120 & 35 were taught side by side.</p> Link to comment Share on other sites More sharing options...
thomas_hardy1 Posted January 22, 2009 Share Posted January 22, 2009 <p>In case you don't find a place to help you....<br> I avoided developing B&W film for a long time because I thought it would be difficult. A few weeks ago I learned to load 35mm film onto the plastic reels. With a little work I became proficient at it.</p> <p>My 16 y/o daughter is taking photography in school and has introduced me to Samigon (easy load) reels. She could immediately load her film using these reels compared to the traditional Paterson type. I think loading 120 film would be super easy because the large tabs would keep the film from buckling in the middle.</p> <p>I would develop a few rolls of 35 and then use the same reel to then develop 120 film.</p> <p>All you need are two reels, a tank, the chemicals and a way to measure. You need complete darkness for only a few minutes to load the film. The rest can be done in the light. I have been scanning some film, but I do have the ability to print using a couple of enlargers.</p> <p>Here is a link discussing these easy to use reels.<br> http://400tx.blogspot.com/2006/06/fool-proof-samigon-reel.html</p> <p>Good luck.</p> <p> </p> Link to comment Share on other sites More sharing options...
brian_carter2 Posted January 22, 2009 Share Posted January 22, 2009 <p>When I was a young lad I watched a great PBS series on photography that included processing film and making enlargements. These days, I'm sure you could find some good resources on youtube. Have fun!</p> Link to comment Share on other sites More sharing options...
robert_hess Posted January 22, 2009 Share Posted January 22, 2009 <p>Check out the Visual Arts Center of NJ in Summit: http://artcenternj.org/about.php<br> They have really nice facilities and darkrooms and they offer classes.</p> Link to comment Share on other sites More sharing options...
steve_mareno Posted January 22, 2009 Share Posted January 22, 2009 <p>It's getting to the point where you'll HAVE to learn by videos. I met someone who teaches at the local university where I live and he said they don't even teach any darkroom related courses. It's all digital workflow. Yikes!</p> Link to comment Share on other sites More sharing options...
thomas_hardy1 Posted January 22, 2009 Share Posted January 22, 2009 <p>Speaking of videos. You tube has many short videos showing how to develop film.</p> <p><a href=" <a href="http://www.youtube.com/watch?v=6P9bNcBE_Hc&NR=1">http://www.youtube.com/watch?v=6P9bNcBE_Hc&NR=1</a></p> Link to comment Share on other sites More sharing options...
stan_noreika Posted January 23, 2009 Share Posted January 23, 2009 <p>Tom,<br> I used to live in central New Jersey, right off 195. For me, it was a 40 minute drive to New York Camera and Video in Southampton, Pa.<br> www.nycv.com<br> They still do in house E6 (slide) processing, as well as C41 and, surprisingly, b&w. They also had a section for darkroom supplies. A little more expensive than B&H, but a little closer and they're open on Saturday and Sunday. I think you may be able to get some darkroom advice from them, at least from the 'seasoned' sales help. The younger group only knew how to talk digital.</p> Link to comment Share on other sites More sharing options...
tom_aellis1 Posted January 23, 2009 Author Share Posted January 23, 2009 <p>This is simply awesome. THANK YOU SO MUCH. I have the whole day to explore these options. And I WILL. I very much want to develop my own C41 b/w as it's just too expensive. I'd rather wait and invest the money into a Nikon 9000 for my workflow. I sold my old 8000 as it was not getting any use and the driver for the new Mac OSx was rough at best, even when trying the trials of Vue and (can't remember the other one).</p> <p>Again, Thank you and I'll post my findings and action.<br> Tom</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now