Exposure latitude color neg. vs. color chrome film.

[bill_glickman]

Has anyone ever performed testing to objectively demonstrate how much more exposure latitude negative film has vs. chrome film? If you read published data, it suggests on average 1-2 stops more. But yet, I still hear boast about 3-4 extra stops. Maybe its a specific type of color neg film that exceeds in this area? Unfortunately, film makers don't test films for this and rarely publish any "real world" test data on this issue.

[todd_caudle]

This doesn't answer your question about existing test results, but

you might try this: Make four exposures of the same subject on the

same roll of film (save the 4x5 sheets for something else), take one

at correct exposure, then one each +1, +2 and +3 stops. Take it to a

quality lab and tell them what you did and ask them to print four

prints that look as close to the same as possible. They'll be able to

do it with little effort. They'd also probably get a good print,

albeit slightly less contrasty, from a -1 exposure. Slide film, on

the other hand. . .Well, +1 or +1.5 over and you can usually transfer

it straight to the dumpster.

[christopher_campbell2]

In the October 1994 issues of "Camera & Darkroom," Joe

Englander describes what appears to be a very elegant

procedure for determining a personal exposure index that

correlates to an evaluation of a film's usable range by contacting

printing a 21-step density tablet. The article, entitled "Therapy for

Exposure Anxiety," is available as a PDF file on Englander's site:

 

<p>

 

http://www.englander-workshops.com/documents.htm

 

<p>

 

I'm doing architectural photography and typically exposing Fuji

transparency film (Astia, Provia, RTPII), as well as negative film

(NPS, NPL), for each shot, and so am extremely interested in

this question as well. In order to perform this test on these five

films, I've just had just had my Zone VI/Pentax digital spotmeter

calibrated by Richard Ritter, and purchased both both the

Wallace Expo Disc and the 21-step tablet that Englander

recommends. I'll report back when I have the results in front of

me.

[ellis_vener_photography]

Christopher is on the right empirical approach but there is

another way of looking at the problem.<P>While a color negative

may have more dynamic range (d.r.), in general we don't look at

color negatives, we look at prints made from color negatives or

we look at lithographic or even inkjet or dyesub reproductions of

the orginal image. So you really have to consider what the d.r. of

the final reproduction step is. For virtually all commercial (mass

distribution) lithoigraphy (magazines, posters, brochures, etc)

the dynamic range is equivalent to about 4 stops, no matter what

the original medium (color neg, transparency, digital) is. Most

color prints have a slightly larger d.r. than that, but not by

much.<P>Of course it always helps to have more detail up into

the highlights and down into the deep shadows, but making use

of that additional range in a way that doesn't look faked is tricky.

[bill_glickman]

Chris, the pdf file was too blurry to read? Anyway, I tried to

devise a test once to accomplish this... I set up white towels, grey

towels and black towels. I used towels so I could evaluate how much

texture I could see in the film. I started the with white towels

with a bright light on them... the light shined downward to the other

white towels, so that each towel droped one stop. And of course the

greys droped and then the black based on the position of the

lights... Considering white to black will give you about 5 stops,

you only have to manipulate the lighting to gain the additional 4

stops. AFter hours of setting this up and shooing, I patiently

awaited the film... then I ran into my next problem... the chrome

film was easy to read, as expected about 4.5 - 5 stops. But I was

unsure how to read the negs? I was searching for texture in the negs

through a loupe on a light box, but I found it too hard to read... I

thought about scanning it, but that would intrdouce a new variable.

Was this test sensible?

 

<p>

 

I later found that a white porcelain piece of art will yield

about 2 extra stops for white and black flocking paper (used to line

the inside of cameras) absorbed two more stops vs. black card. So I

felt between these two, I might have a way to shoot objects all in a

row with even lighting, allowing the subjects reflectivity to produce

the desired reflected light to the film. I was hoping someone with

a bit more experience than my home brew methods has done this already?

How about peoples experience using color neg film?

 

<p>

 

Ellis, as per your comments on the final product being the

bottleneck... Even if you use 10 stop film and print on 4 stop paper,

digitaly, you simply compress the values to fit within 4 stops. But

the beauty is, no loss of detail. If I can't record it on film,

forget it, even digitaly its a battle... and landscapes we have no

control over the lighting....sometimes I don't have weeks to ride out

the lighting so its just perfect...

[walter_glover]

In answer to Bill's 4 stop window suggestion:

 

<p>

 

In the good old, bad old days when we shot a piece of film and

sent it off to a client who got a pre-press expert to scan and

prepare the image for publication we all swore by the

four-stop-window because it aleviated the need for compression

or expansion.

 

<p>

 

With the level of scanners available for personal use by modern

hybrid workers and the pre-press skills (or lack of) of the

practitioners I doubt very much that compression or expansion

has become any more desirable.

 

<p>

 

Somebody more qualified than me will doubtlessly have another

perspective on this. However, I coninue to shoot with the final

four-stop-window in mind and it works to the satisfaction of my

publisher clients and my phot-display clients. And it allows me

to keep the work-flow simple.

 

<p>

 

Cheers ... WG

[stevewillard]

Hi Bill,

 

<p>

 

Ctein in �Post Exposures� claims color negative film has an

absolute range of 10 or more stops ( page 80 ). The dynamic

range is usually two stops less then the absolute range. I can

rely on some detail in Zone II and Zone IX on the color negative

film I am using now. This of course depends on the heal and

shoulder of the characteristic curve of the film. Films with more

pronounced heals or shoulders will have less dynamic range.

 

<p>

 

Why your negatives showed no detail at all might be do to an

exposure error or a processing error. Did they appear thick?

Did they appear thin? Was there a presence of an orange

mask. I once sent some 35mm color negs for processing and

the lab developed them in B&W chemistry? They had a deep

blue tint to them.

 

<p>

 

I believe the best way to characterize your films is to take the time

and expense to construct a characteristic curve of each film.

The information in embedded in these curve is amazing. �The

Negative� outlines a method for doing so, but I can provide you

with additional tips to make it more accurate and easier. Once

you have a curve you can easily and accurately extrapolate the

dynamic range. Overlaying curves from different films will clearly

highlight the differences.

 

<p>

 

Hope this helps.

[bill_glickman]

Steve, thank you, you are still the color negative guru!

 

<p>

 

> I can rely on some detail in Zone II and Zone IX on the color

negative film I am using now.

 

<p>

 

OK, so with this film, you estimate 7 stops you can record

detail, is this correct? I find this reasonable based on my shaky

tests. What film is it? I have been testing Kodak Porta VS160.

 

<p>

 

> Why your negatives showed no detail at all might be do to an

exposure error or a processing error. Did they appear thick? Did they

appear thin? Was there a presence of an orange mask.

 

<p>

 

Yes,they clearly had an orange cast...but I just had a hard time

reading the dark areas on a light box, I think I started seeing

things? And yes, very dense.. I could easily make out 5 stops, but

then I kept second guessing myself, hence the reason I was looking

for an easier solution, and I don't have a dark room.

 

<p>

 

> I believe the best way to characterize your films is to take the

time and expense to construct a characteristic curve of each film.

 

<p>

 

What information does the curve tell you that is useful in

shooting? My main goal was to get a more accurate feel for the

number of stops of lattitude vs. chrome film. The neg film does not

scan as well as chrome film, and from what I determined from

scanning, I don't see a big difference in exposure lattitude, at best

I see 1.5 stops, not the extra 4 stops I was hoping for. If that is

the case, I doubt I will continue to use it as it is much harder to

get the colors accurate in Photoshop.