reportsfromluke Posted October 10, 2007 Share Posted October 10, 2007 I recently bought a really nice Canonet QL17 (with literature, case and flash)for less than $30. Fair deal. Everything works well, but I am having a bit oftrouble adapting to the light meter from using Nikon SLRs. Can anyone explainhow the Electronic Eye (marked by the red 'A' on the lens) works? All help willbe appreciated. Thanks a lot. Link to comment Share on other sites More sharing options...
riffeym Posted October 10, 2007 Share Posted October 10, 2007 Hi Regan! If you look through the viewfinder, on your right you will see a pointer and a scale marked in f-stops. The light meter sets the aperture automatically according to the film speed you have set, you do nothing except focus and shoot. If the available light is to dark or too light there is a shutter lock that is activated preventing you from tripping the shutter. Pretty simple. Mike Link to comment Share on other sites More sharing options...
reportsfromluke Posted October 10, 2007 Author Share Posted October 10, 2007 I am used to working with SLRs where the light meter determines acceptable exposure based on the f stop you have selected, is this not possible here? Thanks Link to comment Share on other sites More sharing options...
luis triguez Posted October 10, 2007 Share Posted October 10, 2007 You can mislead the photometer inserting a 200 ASA film (for instance) and setting to 400 or even 800, but better idea is releasing the aperture ring from “A” and use it manual. Link to comment Share on other sites More sharing options...
luis triguez Posted October 10, 2007 Share Posted October 10, 2007 Sorry...releasing the aperture ring from "A" and use it manual. Link to comment Share on other sites More sharing options...
jamesmck Posted October 10, 2007 Share Posted October 10, 2007 <strong>"meter determines acceptable exposure based on the f stop you have selected"</strong><p> You are describing "aperture priority." The Canonet has "shutter priority" (you set the speed, the meter selects the proper aperture). Link to comment Share on other sites More sharing options...
JDMvW Posted October 10, 2007 Share Posted October 10, 2007 Same answer, in case anyone wondered, for the even less sophisticated, but often cheaper, Canonet 28. Link to comment Share on other sites More sharing options...
winfried_buechsenschuetz1 Posted October 11, 2007 Share Posted October 11, 2007 If you are looking for an aperture-priority rangefinder camera: you will find this feature in all models of the Yashica Electro series. But these do not indicate shutter speed in the viewfinder (they just have warning lights for overexposure and slow speeds). The only cameras I know with aperture priority and indication of shutter speed are the Agfa Selectronic Sensor S (there is also a Selectronic model without rangefinder), the Voigtlaender VF101 and the (almost identical) Zeiss-Ikon S310. Link to comment Share on other sites More sharing options...
rick_keir Posted October 11, 2007 Share Posted October 11, 2007 also, check the foam light seals, which have probably gone bad. This can happen no matter how carefully the owner kept the camera, on models ranging from cheapies to professional gear. The eBay seller "interslice" (Jon Goodman) sells foam replacement kits ($12 including shipping, enough foam to do about 5 cameras), which are worth it for the directions, or just buy some black foam at a craft stores. I have no connection with Jon Goodman other than as a satisfied customer, you can search photo.net on "interslice" to see many more satisfied customers. Link to comment Share on other sites More sharing options...
charles_stobbs3 Posted October 11, 2007 Share Posted October 11, 2007 I have owned two QL17GIII's and several 28's. All things considered I like the 28 better but it is a fully programmed camera, neither aperture nor shutter priority. Link to comment Share on other sites More sharing options...
bonsignore_ezio Posted October 12, 2007 Share Posted October 12, 2007 The QL17 is indeed designed to work in a shutter priority automatic mode, as many comments have already suggested. However, there actually IS a way to trick the camera into working in an aperture priority semi-auto mode. It is as simple as follows: - Leave the camera in "A"; - Select MENTALLY the aperture you want to use; - Turn the speed dial until the selected aperture is shown by the needle in the viewfinder. The only drawback with this system is that you are now shown the shutter speed you are operating at. Even for this there is a simple solution: start at 1/500, and go down counting the clicks. Link to comment Share on other sites More sharing options...
vincenzo_maielli Posted October 15, 2007 Share Posted October 15, 2007 Tha Canon QL 17 (i own the G III last model) is an automatic shutter priority exposure camera, whit a mechanical shutter. When you set manually the shutter time, the camera set automatically the appropriate aperture, according to the ASA sensitivity of the film. Also, is possible to use the manual exposure, but lack the exposure (you need to use the Sunny 16 rule or an external exposure meter).To replace the outlawed 1,3 volt PX625 mercury oxide battery, the best option are an MR-9 battery adapter or a Weincell MRB625.Ciao. Link to comment Share on other sites More sharing options...
rick_mason Posted October 22, 2007 Share Posted October 22, 2007 Hi I'm also having trouble with the exposure meter settings on a QL17. I've got one of the early large QL17's circa 1965. This one has no needle or numbers indicating f stops. It also has a completely different battery compartment - a screw in plate over a battery well - that seems much too big/deep for the px625 (as opposed to GIII's which had a sort of slide/lift plate for the battery). Any pointers? Will a properly installed battery make the light meter indicators and needle appear or did this model simply not have them. I hope this okay to post this here. Regards Link to comment Share on other sites More sharing options...
rick_mason Posted October 23, 2007 Share Posted October 23, 2007 Problems solved. I found a manual for the early Canonet QL17 thanks to Hakuna Matata. The site has a number of rangefinder manuals. http://www.pentax-manuals.com/manuals/range/range.htm The confusion for me is caused by the spring in the battery compartment (clearly visible in the manual) is missing on my Canonet. Hopefully I can replace this and get the meter to appear. cheers elwrongo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now