Jump to content

Recommended Posts

MACCO has the marketing rights to use the Rollei name on film products. MACCO

sources these products from various manufacturers, such as Filmotec and Agfa Gevaert

(Belgium). The Rollei Retro films are actually made from master rolls purchased from Agfa

Germany after they closed, and are identical to APX-100 and APX-400. For these you can

use the published Agfa processing times for APX-100 and APX-400, however I am sure

processing instructions are packed with the film you order.

 

McCluney Photo

Link to comment
Share on other sites

Maco (Hamburg-Stapelfeld) is working under the brand name Rollei.

Nice films, partial made by Gevaert in Belgium and Filmotec in Wolfen (Germany, former OrWo).

Here you will find the lastest development info:

http://www.fotohuisrovo.nl/documentatie/Development_Rollei%20films.pdf

 

The only existing films (not own production) are the Retro 100/400 films which are in fact APX100/400 emulsions from the latest Agfa production run 2005. Very suitable in Agfa Rodinal, at the moment produced in Vaihingen/Enz by A&O on the former Agfa chemical plant. Maco is doing the export for A&O oversea.

Here is their latest Rodinal info data sheet (2007):

http://www.fotohuisrovo.nl/documentatie/Rodinal.pdf

 

On our web site you will find all Rollei data sheets.

 

Best regards,

 

Robert

 

Rollei/Maco dealer for the Netherlands.

http://www.FotohuisRoVo.nl

http://www.FotohuisRoVo.com

http://www.FotohuisRoVo.eu

 

http://shop.fotohuisrovo.nl/specials.php?osCsid=5d55fe1654d90715e4a43bc57567dfa5

Link to comment
Share on other sites

Here is the Rodinal table from Agfa around 1999.

The times are refering to APX100 and APX400 before 2003 when the emulsion was changed. Same is valid for the Delta times which emulsion was also changed by Ilford later. The Fuji Acros 100 is even not mentioned in this table.

 

Later on the Agfa APX100/400 emulsion changed in 2003. In 2005 Agfa was NOT able to reproduce their emulsion in exactly the same way. Production APX end 2005 had to be reworked by Agfa to meet it's specification. All Retro emulsions are based on the 35mm original material. So also the 120 roll film is based on that material which was different before 2003 on clearer base. The more grey base of the 35mm APX version has to do to prevent the "light piping effect" to the 35mm cassette.

Rollei/Maco bought the whole rest stock from Agfa en let made elsewhere the 120 roll film material of the same batch.

 

http://www.aphog.de/downloads/agfa/Rodinal.pdf

 

In principle they could reproduce the APX films in their former R&D location Mortsel Belgium by Gevaert, the former R&D lab for Agfa. Rollei is making in this small plant their Rollei 820/400 I.R. film, the Rollei Pro (C41) scanfilm, the new Rollei RSD (slide film, based on microfilm technology) and their latest I.R. film, based on APX100 (so E.I. 100) with extended sensitivity till approx. 820nm/850nm. This new I.R. film will be available in a few months on the market and is in fact the successor of the previous Maco I.R.820C film, made by Efke in Croatia on Efke 100 technology with extended I.R. ability.

I am sure this patentet film technology from Maco is now executed by Gevaert to close the last gap in their film business.

 

Quite nice to see a revival of more I.R. films at the moment.

 

Best regards,

 

Robert

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...