citizensmith1664875108 Posted September 24, 2001 Share Posted September 24, 2001 I just got a 28-105 lens with its canon lens hood. I usually have a POLrizer on when I'm outdoors. In this case a Tiffen unit. THe problem is, it won't fit. <p> If I attach the polarizer first the lens hood then won't go over it due to the grip provided for rotating the filter. <p> If I attach the lens hood first there is no finger room to then screw on the polarizer. <p> Any suggestions? Like a polarizer that fits for instance? <p> Thanks <p> Marcus Link to comment Share on other sites More sharing options...
puppy_face2 Posted September 24, 2001 Share Posted September 24, 2001 If you want to use a polarizer, you'll have to remove the lens hood. If the polarizer ring stuck out far enough to allow it to rotate with the hood on, you'll end up including it in the picture. Link to comment Share on other sites More sharing options...
Ken Katz Posted September 24, 2001 Share Posted September 24, 2001 I just use a standard Tiffen circular polarizer (58mm) without any problems. I don't stack filters (take off the UV) and the hood slips over the filter without any problems. I can, with some difficulty, turn the polarizer with the hood on, but I usually just take it off. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now