j_thompson Posted December 30, 1997 Share Posted December 30, 1997 I have been using Tmax-100 for years but for the first time yesterday ended up with purple negatives. I have noticed threads on this subject in the past but what is the cause? Can it be corrected by re-fixing and re-washing? The only change in my small tank development process (as far as I know)was a change from kodak to Ilford Universal fixer. Thanks in advance for your help. Link to comment Share on other sites More sharing options...
marv_thompson Posted December 31, 1997 Share Posted December 31, 1997 I believe the answer is in changing fixers. I used Ilford Universal fixer with t-max and had much more purple stain than with the Kodak fixer. I believe I read recently in another forum that the negatives could be re-fixed and washed to remove most of the stain. A longer fix time and clearing agent were recommended to alleviate the problem. At one time Kodak's opinion was that the stain was not a problem and did nothing to degredate the print quality. I quit using t-max after my initial tests and have not kept up with the debate on the stain or its effects . Link to comment Share on other sites More sharing options...
carlo_rogialli Posted January 1, 1998 Share Posted January 1, 1998 As far as I know, the cause to purple stains in T-MAX negatives is the insufficient removal of the anti-halo dye. This evenience normally implies a non-perfect fixing action.This is mainly due to the T-Grain structure of T-MAX films: in Tabular Grain films the silver halyde grains are literally smashed and flattened before the emulsion layer is coated onto the plastic film.As a result, the emulsion layer is far more compact than normal, and the fixer has difficulties in penetrating the gelatine: its action is far slower than normal. <p> Just to report a "rule of thumb", with T-MAX films you should use a fixing time double than that suggested by the fixer's manufacturer for "normal" films. A further safety rule is to consider the exhaustion rate of the fixer to be doubled (1 TMAX film = 2 normal films). <p> Films showing heavy purple staining can be successfully re-fixed and re-washed. If the staining is light, probably a long re-wash in running water (30 min. or so) will suffice. <p> I normally use Ilford Hypam fixer at film strength for 6 minutes (about three times the suggested time); at this point my negs show a very light purple staining that disappears in the first 5 minutes of my standard 30 min. wash in running water. <p> Happy new year <p> Carlo Link to comment Share on other sites More sharing options...
klaus_werner2 Posted January 2, 1998 Share Posted January 2, 1998 Recently I used TMAX3200 for the first time (picked up an out ofdate roll). I developed in Ilfosol for 17.5 minutes (ISO 3200 rating)and fixed for 10 minutes in Ilford Hypam. No pink to be seen anywhereand great negatives. So it must be the fixing time. When I use mynormal films (ISO 100 Ilford/Orwo) I use 4 minutes fixing, that istwice the normal clearing time. Link to comment Share on other sites More sharing options...
bob_tipton Posted January 8, 1998 Share Posted January 8, 1998 I've heard that the purple stain can be eliminated by allowing the negatives to be exposed to sunlight for a length of time. Personally I've not tried it. I use Kodak Kodafix solution mixed 1:3 for 7 minutes without a problem. Has anyone else heard about or tried the "sunlight" theory? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now