jim_korpi1

Hello all. Anyone know where I can locate a DC transformer for a CPP2 processor? This is a US machine so it is rated at 115 volts. I've attached a photo of the pin configuration. Thanks a bunch. Gratefully, Jim Korpi

Hello all. I have a JOBO CPP2 processor. All things work on it aside from the motor. It worked up until a little while back. I put on a 2000-series tank with fluid in it, it spun a few times and then stopped completely. I read through manuals and repair guides and decided I should have a look at fuses... I opened up the unit and found the motor fuse blown. I changed the fuse, plugged it in and the fuse blew instantly. I called Catlabs and someone over there said it could be the two motor "DC regulators" on the board. I'm forgetting if they said "DC regulators" or "DC" something else. I could not find any reference to any "DC" motor... in the manual or repair guide. Have any of you had an issue like this? If so, did you figure it out? I've heard folks say to hook the motor up to an power supply to test it out, but I wouldn't know how to do so safely. Any thoughts? Curiously, Jim

<p>Thank you all for your help. I will try your suggestion in the next day or so and then post my results.<br> Gratefully,<br> Jim</p>

<p>Thank you John for your comment. I am using the Unicolor Powder C-41 Kit and followed the times and temperatures. <br> When you say run the subsequent steps again, do you mean actually sticking the dried negatives back in the tank and running them through the bleach and subsequent steps? I apologize if this is a dumb question. I am new at this whole thing and am about to process more film in the next few days.</p>

<p>Larry,<br> When you say incomplete bleach fixing, do you mean that the bleach is exhausted in some way or that the timing is off? I followed the proper procedure as closely as I could. I am not sure what I could have forgotten.<br> Thank you for your thoughts.<br> Gratefully,<br> Jim</p>

<p><img src="http://jimkorpi.com/blog/wp-content/uploads/2015/03/Korpi_141214_170.jpg" alt="" width="720" height="575" /><img src="http://jimkorpi.com/blog/wp-content/uploads/2015/03/Korpi_131216_010.jpg" alt="" width="720" height="583" /><br> With my Jobo CPE 2 processor I have had good luck aside from some stains in the skies of some images. If anyone has ever had this problem and can help me to figure it out I would be forever indebted. Attached are a few examples. </p>