jjgarcia

Thanks for the Reply, my lens is a CF so therefore is X-sync. There is another thread also talking about the same topic I think but I'm still confused. I've made few tests today with the PC-Sync + Hotshoe now attached to the coldshoe on top of the PME90, then the remote Godox XProN, but I think I've not yet managed to understand how it works the whole set. Thanks JJ

Hi there! First of all thank you for reading, i'm new to the forum and a newbie with the Hasselblad so please keep that on mind if I'm not so precise sometimes. Recently I was able to borrow a 503 CW and I'm enjoying so much the "toy". I'm developing my own film and learning from my previous film Nikon EM. I've decided to start shoting with flash and I've attached a hotshoe with the PC sync cable to the lens (80 mm f2.8 CF T*). Then i've connected the remotes to a pair of Nikon SB600/700 (Using 2 receivers X1RN and the Godox XProN to the hotshoe). The Setup works fine in the D7100 and once I had the proper light I've just transfered the settings to the 503CW (i.e. f8/125 and ISO 100 film) and tested. The 503CW was triggering both remotes and I was thinking the approach was correct but when I've developed the film (2 rolls) all shots are "blank/transparent" (film code/brand and exp numbers are properly identifiable on the film). What am I doing wrong? I'm working in Manual mode for the flash so no TTL. Thank you very much in advance, J.J. Garcia