adrianlambert
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by adrianlambert
-
-
Btw Catlabs says the following about the revisions. But none of their numbers match this unit.
BULLETIN # B019
Rotation Motor Upgrades for the CPP-2 and the CPA-2 Processors
Introduction
Newer systems, like the 3000 series EXPERT Drums, require increased strength in the rotation motor circuit. This extra load can make the rotation speed of the tank or drum sluggish. The 3000 series EXPERT Drums create the heaviest possible load for the rotation motor circuit.
Beginning production of the CPP and CPA had a single-bearing rotation motor.
CPP Serial # ARXXXX-10593
CPA Serial # ARXXXX-10312
1st Upgrade: The single-bearing rotation motor was replaced by a double-bearing rotation motor.
CPP Serial # 10594-20455
CPA Serial # 10313-13309
2nd Upgrade: The rotation motor circuit was strengthened to accommodate larger loads, that is, 3000 series EXPERT Drums.
CPP Serial # 20456-21999
CPA Serial # 13310-21999
3rd Upgrade: A stronger rotation motor (the same as in the ATLs) was introduced and the rotation-motor circuit was strengthened to accommodate the new motor.
CPP Serial # 22000-present
CPA Serial # 22000-present
-
-
Standard calibration distances start at infinity, then at 25 feet/7.62 meter, 15 feet/4.572 meter, 6 feet/1.8288 meter then go back to infinity and recheck/adjust until all focused distanced from infinity to the lens close focus distance is correct.
I also have a Konica Pearl with focus issues. I’ve followed your advice. When it comes to near and far focus though what I the method in general terms of getting near and far objects in focus. I can set the infinity focus. The near focus appears to be good. The mid focus seems a bit out.
Odd Jobo CPP2 4080 serial number plate.
in The Wet Darkroom: Film, Paper & Chemistry
Posted
Of course! Thanks for pointing that out. Totally missed that.