<p>Hello everyone,<br> I found 3 Hasselblad 500 EL/M in the attic. I bought a 9v battery adapter to make them work.<br> One of the three works wonderfully, I put the battery and it works great.<br> The other two, however, there is nothing going on. Mirrors are up and switches on the right side position is in position "o" (not L, not T) and selectors to "O" (not AS / A / S or SR). Everything should run but nothing happens.<br> I read that it was possible to uncock/unjammed them by turning a screw inside, lens side.<br> On the camera that works, I can do it, turning the screw until the mirror goes down and locks, without forcing.<br> But on both models that do not work, I turn the screw, the mirror goes down but as soon as I release the screwdriver, mirrors back pronto.<br> Therefore impossible to re-arm the camera, despite having followed the manipulation described here: www.dmin-dmax.fr/photoe2b.htm or here http://www.david-odess.com/faq.html#q18 (even if it is not the exact same issue, i.e. the body of the cameras don't have any lense attached)<br> Are there experts in the area that would be able to advise me?<br> Can the failures come from an internal spring that prevents the mirror to hang on the bottom?<br> Or a problem in the power supply level? or with the 'shooting button' ?<br> I noticed a small difference: watching the body of the camera (without lens / or film) from the back (so like if I was looking through the lens), with the 2 devices that do not work, on the right side there is a bit of an apparent gear, while for the device that is working, the gear is inside the body and I see no teeth but only a flat portion.<br> In advance, please excuse my english, not a native speaker.<br> Thank you in advance for any help !!<br> hycday</p>