fredrik_blomberg

Thanks a lot! This is very good help for me. My issue now is to find a tool to remove the link pin without damage it. What tool did you use? Mine is very stuck

This is correct. I did find a copal manual for yarsica that mention this on page 15. They recommend some Petri pin puscher tool to remove the in. It is very stuck so I need to think of something smart to not destry it more. Any suggestion of any simular tool? https://learncamerarepair.com/downloads/pdf/SPT-Copal-SVE.pdf

There is a lot of good videos on YouTube done by kind people that share there experience. This model is missing

So you just push it out?

Hum, it is really stuck there. I destroyed the cocking arm on a scrap yarsica with same shutter to find out how to remove it gently. I still don't get it. If this was a valuable camera then I would send it to a proffesonal. Now it's more win ore lose and most of all learn

Thanks :) I will try to lift it of, can't se any screws that hold it in place

These 3 copper screws will lose the shutter. So I can reach the shutterblades. Problem now is still that it will be super difficult to put them back because of the cocking arm block it. Ether way I do something completely wrong ore other way this shutter is super difficult to work with. I have some other yarsica with same shutter so would be good to find out.

I suspect I need to remove this part, but how?

I did find a 4th skrew and that one did lossen all of it. My problem now is the cocking arm. I don't understand how to lose it to be able to lift out the shutter.

Hello! I would need to get help to desamble the shutter to put back the shutterblades in correct possiition. I have a Konica auto S2 that have hade some issues with self timer and the focus ring. I could fix the self timer and the problem with the focus ring was because one of the screws that holds the shutter had dropped out and blocked the focus. It was easy to mount back but the problem is that one of the shutter blades came out if possiition because of this. I have lossen the 3 screws that holds the shutter together but it is something on the side of the shutter cocker arm that still need to be lossen. I need to take the shutter appart to put the shutterblades back in correct possiition. For me it looks like the cocker arm need to be removed ore something. How do I desamble the shutter?