<p>On the Luna-Pro S dial, there is a ring you can set for correcting exposure. For example, you are using a filter that has a "x4" correction on it so you can set this ring to "4" on the LV correction scale and ..."it will automatically correct for the filter"... well, It only works if you first take a reading, set the dial as normal, then adjust that ring to 4 but subsequent readings aren't automatically corrected as the instructions indicate...<br> lets say you get a reading of 18 on the scale, you set it to 18, it says (ASA 100) 1/125 @ f/8 so yes if you turn the correcting ring to 4 (2EV) it's going to say 1/125 @ f/4. BUT if you leave the correction ring at 4 (like the manual instructs), take another reading and get say 18 again, and set the dial to 18, it says 1/125 @ f/8, not f/4 like it should as per the instruction manual (says "It Will Automatically take into consideration..."...)<br> Am I doing something wrong? or are you supposed to set it every time and I'm mis-reading the manual?<br> http://www.cameramanuals.org/flashes_meters/gossen_luna-pro-s.pdf</p>
