jimmy_li1

Thank you !Martin.

But I am still trying to find the way to made a 8x11 cartridge to fit all Minox and even Riga.

<p>Been tested at AIII,B,BL,C,LX,Riga<br>

Still got the jam at Riga. Need polishing by hand to adjust to fit Riga.</p>

<div></div>

Thanks for Anthony,Julian and Martin:-)

I made it by traditional machine.I guess 3D printer can't make the film entrance part well.

I am still in the business trip and will find the time to polish it and test the film myself.

Hi Martin, I contacted them already but they told me they can't make the supply even I attached the barcode or numbers.I

will find the way to replace it myself.

Since the Minox daylight developing tank getting less and less.Which is also pretty fragile ,i've got an experience of broken a Minox

developing tank during the tank washing.Markus Dunkmann released a smart design for the 8x11 Minox developing reel which could

used the Jobo 1501 DuoSet 135/120 reel to DIY a little bit and change it to a 8x11 Minox developing reel.Before you start the DIY

processing, you will need a Jobo 1501 developing reel and the following tools: a mini wire saw,some fine sandpaper,a simple cutter and

a small driller with a 2mm drill bit.

The DIY processing is all in the PDF file link as below:

http://db.tt/xIBhlzq0

Hi,

Appreciate your suggestion.I am collecting all the suggest now and will consider the further adjustment.

Here is the Link of My Slitter Model II

https://skydrive.live.com/redir?resid=1B3E25DA8FFD4238!627&authkey=!AGhH2aoHhkglvHY

Or if you email to for request the using manual.

Thanks for the notice

Martin,

thanks a lot.

I was get used to set the "red dot" at the distance dial meter for shooting.So sometimes my focus are not at the correct point.These are my

recently practice shooting.I will be more then happy if somebody could discuss the problems with me,thanks for the notice.<div></div>

Hi Martin,

Do they still offering the slitter sets?

Jimmy

Hi Martin,

This prototype is more solid than my design,and if I tested everything all fine without problem then i will reduce a little thickness of the metal plates.On the other hand, i still got the rotation handle problem,which the black plastic on the photo is not my design too.I just found a replace handle to check the cutting result first.And i will put on my idea handle on when all the parts running smooth.I will keep on posting the finalizing item.

thanks

Jimmy

This Prototype is one kind of the cutter blades type ,which is referenced by the ACMEL 8x11 film slitter.I thought this

model might be cheaper cost then the roller blade type.But i was wrong,finally this design came out with more parts

and cost almost round about the roller blades type slitter.

One great advantage is the cutter replace is cheaper and easyer than the roller blade slitter.

Jimmy<div></div>