raffy

<p>UPDATE:<br /><br />I took my Hassy to the store to get it fixed.<br> The guy said when he fixed my Zeiss 80mm lens, he tested it (therefore "calibrated") it with his 500c/m body while mine is a 500C. <br />Apparently, this makes ALL and every difference, so this time he asked me to leave both, camera and lens with him.<br> I got it back 3 days later, and now it works like a charm, i actually developed 3 rolls of Portra films since then and they all came out as expected.<br /><br />Thank you all for your answers!<br /><br />Heres a picture i took with it after i got my Hassy back, taken at the University i study at, UFRJ.<br /><br /><br /><br> THANK YOU!!! <br> <a title="Library - My first Hasselblad film developed!!! by Raffy Carvalheira, on Flickr" href=" src="https://farm8.staticflickr.com/7285/16311979253_8f901b485f_z.jpg" alt="Library - My first Hasselblad film developed!!!" width="639" height="640" /></a></p>

<p>Thank you for your reply, Stephen, but i believe thats not really the case.<br> Having film in the back or not, or even having the back itself attached wont influence on shutter/aperture tests on the lens/body. Just the body itself and the lens are enough. <br> Lets keep following the thread and see what everyone might say! </p>

<p>Good evening everyone.<br> I got a Hasselblad 500/C with a 80mm 2.8 Planar lens.<br> Used it normally the past week but today something really odd happened.<br> I can fire the shutter, mirror goes up, curtain opens. Lens diaphragm is set at desired F/stop for preview, it shuts when firing.<br> But the lens is not working at any shutter speed! It just closes the blades when i press the shutter, no matter what speed i set the lens.<br> I took then lens off, made sure the drive shaft (that screwdriver shapped thing) is lined with the red dot, both body and lens.<br> Then, i fired the lens using my finger and it worked!!!<br> Ok, i manually cock the lens shutter, put the it back on, fire the body shutter with no back on so i can see thru the curtain and it works!!!<br> After that i wind the crack, everything is set again, i press the shutter... shutter speed doesnt work again, the lens blades shut and thats it<br> Once again, lens off, i press the shutter trigger on the lens and it works normally.<br />I cant figure out what the problem is, anyone experience this problem?<br> Any suggestion/help will be greatly appreciated!<br /><br />Thank you very much!</p>