delvis_cheng

<p>1) When I rotate the winding lever to the end, it cocks the shutter. Once removing my thumb, winding lever return back and immediately the winding mechanism triggers the shutter. I need to press the shutter button to release the winder lock before I can rotate the winding lever again. I believe there is a screw to be adjusted so that the winding mechanism and shutter release work properly. I attach the photo of the winding lever and someone please show me which screw needs to be adjusted.</p>

<p>Dear All:<br>

My pentax PZ1 viewfinder is foggy and shows trace of mold. I plan to clean it up. Is there anyway to remove the top cover of the camera or any part list from the net that shows the exploded view of the camera? Please let me know. Thanks.</p>

<p>Dear All:<br>

I owned a pentax AF500FTZ and left it in drawer for years. Recently I loaded it with battery and tried to fire it. The test button only lighted up and it wont trigger any flash. Is the problem repairable by DIY? All suggestions are wellcome. Thanks.</p>

<p>Dear All:<br>

I had a 540 speedlite left in drawer for years. I tried to run it again. The speedlite worked when I pressed the test button. However, the LCD backlight not functioning anymore. What is the possible cause and is this problem repairable by DIY? All suggestions are wellcome. Thanks.</p>

<p>My minox aperture ring stuck. Only can be turned between "A", 2.8 and 4. Anyway to free it and how to get access to the stuck spot? Thanks.</p>

<p>The non working Minox PL cost a lot to be repaired by DAG. I plan to disassemble it to see what inside it. Anybody know how to take out the front lens element or pull out the shutter assembly from inside the film compartment? Thanks.</p>

<p>Dear All:<br>

I owned a Minox PL camera. After a few years of storage and recently I found it and went for testing. Only the battery check green light showed up and red LED lighted up at dim light area. The aperture ring stucked. The self timer and the shutter blades were not functioning at all. Can anyone recommend a good place in asia for repair work and CLA for this camera. Thanks. </p>