ddrix
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by ddrix
-
-
<p>Hello,<br>
I scan my negatives using a home-built solution which consists of a DSLR with an apparatus in the shape of a slide duplicator.<br>
Currently, I'm using the backlight from a laptop screen as a light source, resulting in long exposures (~8 seconds) ; I'm thinking of using an external flash instead but I wonder whether this is safe !<br>
Do you think the negatives would suffer any harm from about 2 or 3 exposures to the intense light from the flash ?</p>
-
<p>Hello,</p>
<p/>
<p>I have a Rolleicord (model III, I think) which had been stored for a couple
of years and has developped shutter problems. Slow speeds are too slow and
sometimes stick.</p>
<p>So, after reading a few topics about the operation on the net, I've set
myself to cleaning it. So far, I've been able to remove the front cover, the
front ring of the Xenar 1:3.5 and the front element.</p>
<p/>
<img src="http://damien.drix.free.fr/rolleicord_shutter.jpg"/>
<p/>
<p>As you can see, the black ring which contained the front element still
prevents access to the shutter. How should I remove it, and do I have to remove
the second element with a rubber pad first?</p>
<p/>
<p>Thanks & best regards!</p>
<p>Damien</p>
-
Hello,
<p>Just wanted to share a technique I discovered by chance on my K10D. Maybe
it's already known to you, in which case I will of course apologise for my
naivety ;-)</p>
<p>When you use an older K-mount lens in Manual mode, you must use the green
button to have the k10D measure the correct shutter speed for the selected
aperture.</p>
<p>But actually, you can also do the contrary and have the k10D help you set the
proper aperture for the selected shutter speed. Here is how it's done:</p>
<ol>
<li> Make sure the preview mode is set to Optical Preview. When you twist the
power dial past the ON position, the lens must stop down.</li>
<li> Switch to Manual mode.</li>
<li> Select the desired shutter speed.</li>
<li> Twist the power dial to stop down the lens and keep it in this position. An
exposure meter activates on the top LCD and in the viewfinder.</li>
<li> At the same time, look at the meter and rotate the diaphragm ring until the
meter is centered.</li>
<li> Now you can release the optical preview dial and take the picture.</li>
</ol>
<p>Voilà !</p>
Using out-of-date film?
in The Wet Darkroom: Film, Paper & Chemistry
Posted