mathew_gonzales

Luke,

WOW! Thanks. This is my first roll of SFX and I'm not quite sure what to expect. I have been checking out the Rollei IR also and it looks pretty cool. I used a Cokin P 89B in combination with the SFX. I may decide to buy another when i purchase some Rollei.

I just got done shooting my first test roll of SFX and would like to know what

developer will render the best results- ID-11 (Stock or 1+1), DDX (1+4) or D76

(stock or 1+1). I also shot a roll of Delta 100 and was wondering if i should

process the two together.

thx

Mathew

Finally getting my feet wet again with developing and printing. I Would like to

know everyones opinion on what film developer I should use to achieve the best

results with the following film. I would like to stay away from buying several

types of developer due to cash, space EXC.

The film is all 120

Ilford PANF- 50iso

Ilford FP4- 125iso

Ilford Delta- 100iso

thx

Mathew

"How does it lock up? Dark slide out, lever in "M" position and it should work... but I bought a roll of film and I went through it quickly when I got mine."

locked up as in when i switch the lever to M and cock the shutter and then release the shutter and go to cock the shutter again it will not let me.

"Set the camera to M to fire without film. I just read that you need film to operate normally.

Good luck."

Ok no problem but when i do set the camera to M and fire it, it will lock the shutter. Is that normal? the only way i could figure out how to release the shutter is to manual over ride the shutter and then set it back to normal.

Hi everyone this is my first time posting here on Photo.net though I have been

lurking for some time now reading anything I can. But now I have a problem with

my new RZ Pro 2. The Shutter will not release after cocking the lever all the

way down. Every time I try to release the shutter I get an Amber light that

comes on in the Prism. So here are the things I tried to do.

1. Made sure the lens was on

2. Made sure the Prism is seated all the way on the body.

3. Changed the battery

4. Made sure the timed exposure switch on the lens is set to N

5. Made sure the Shutter speed dial is set to AEF (since I am using a

Prism)

6. Took the dark slide out

7. Made sure the shutter release collar is lined up with the white Dot

8. The RM lever set to normal

Oh and there is NO film in the camera at this time. Also when I set the RM

lever to M the shutter will cock and fire but then I cannot advance the shutter

again. Not sure what?s going on here.

thx in advance,

Mathew