digidave2
-
Posts
42 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by digidave2
-
-
<blockquote>
<p>If you were to use Nikon View NX2, free from Nikon, you do not have to worry about the mouse issue to see the focus point bracket. It shows up on the thumbnail image as well as the full size image assuming you select it by clicking on it in the taskbar across the top of the program. And you can move right into Capture NX2 by clicking on it in the taskbar. I use both programs together. I do not use the browser feature of Capture NX2. I use View NX2 for this function. Joe Smith</p>
<p>That is true as long as the photo hasn't been adjusted in CNX2 & then those adjustments are saved within the original NEF.</p>
</blockquote>
-
<p>Just to clarify. You do know that your mouse cursor must hover over the photo for the focus point to show. As soon as the cursor is off the photo the focus point shuts off.</p>
-
<p>There is a discussion at the CNX2 Flickr group discussing the problems with compatibility between CNX2 & CEP3.<br>
http://www.flickr.com/groups/capturenx/discuss/72157628495818029/<br>
There is an update that CEP3 did that will make it compatible with CNX2 32-bit vers.. The old version was 3.002 & the newer version is 3.003. It seems to be working for the people that have tried it. You can't use the 64-bit vers. of CNX2 but it seems to be an improvement over the old 2.2.8.</p>
-
<p>Damn! I wish I knew what a "Donkey Year" was! I would probably agree. ;>)</p>
-
I've never really minded the creeping myself until this past week. Walking around the north woods of Wisconsin it became a little troublesome for me. As Matt Laur said, you would normally be holding it when walking around but when I was on terrain that was kind of rough I needed both hands/arms extended for balance. Even with a stretchable neckstrap absorbing some of the shock of bouncing. That darn lens kept creeping even when locked into the 18mm position! It would take it a little while to unlock from the 18mm position but when it did it didn't take long to become fully extended. It got to the point that I became more worried about my lens than where I was going & I probably missed some good shots! My lens is about 1 1/2 years old.<br />
-
<p>Did I miss something here? The original question was on "Converting" RAW to jpg. It doesn't ask which is better for adjustments or pixel manipulation.</p>
<blockquote>
<p>I wanted to ask the question here: which is better, ViewNX or CaptureNX2, for converting RAW to JPG?</p>
</blockquote>
<p>The answer to this would be, they are equal because they both use the same conversion engine. Please correct me if I'm wrong because I certainly am not a computer guru.</p>
-
<p>I also use it with Capture NX2. I just purchased it a couple of days ago. The only downside that I can see so far is that it will take a long time to truely discover all of it's capabilities. There are a lot of filters & each one has it's own little buttons & sliders for tweaking. A person could spend a lifetime tweaking things! Keeps me out of the Taverns though. ;>)</p>
-
<p>You can get a 16bit Tiff from CNX2. There will be a dialogue box for that option. Just to clarify.</p>
-
<p>If you don't mind paying $100.00 more than B&H, apparently they have one at 17th Street Photo.</p>
-
<p>For anybody interested, Scott Kelby & Matt Kloskowski do a weekly video with tips & tricks for Nikon owners. This weeks video included this very subject. Episode 10 will go into how to do this on a D300.</p>
-
<blockquote>
<p>Nikon Transfer 1.3.1 and NX View 1.2.2. Everything is fine until I disconnect the camera from the usb and the browser stops working. The entire OS needs to be restarted for Firefox to work again. I have XP Home SP2 and FF 3.0.7.</p>
<p>You do realize that every one of these is out of date. Nikon Transfer <em><strong>1.4.0</strong> </em> , NX View <em><strong>1.3.0</strong> </em> , FF <em><strong>3.0.8</strong> </em> , XP Home <em><strong>SP3</strong> </em> . Just an observation. ;)</p>
</blockquote>
-
Andre: Seems as if nobody wants to actually answer your question. I do agree that sending your camera back to B&H really is the proper way to go. They will just send it back to Nikon & recover their costs.
Now, to the problem at hand. Using the Retouch Brush seems like the way to go. I am by no means an expert on Capture NX but I would think that the retouches would have to be at the same coordinates as the first. The problem you may run into is, what happens if that spot that needs fixing winds up right directly on a straight edge of a building let's say. Where you have a bright blue background & the building is dark brown. The Retouch Brush needs to use surrounding pixels to do it's job properly. It guesses at what colors need to be used & applies that to the fixed area. So you probably will end up with a very straight edge with this little glob of a blue & brown mixture at one point. Now, that being said, you may not even notice it. You may want to do some experimenting, but you can imagine that sometimes it just isn't going to work as you would like it to. I hope I explained that well enough for you to understand. Good luck in whatever you decide to do.
-
I recently bought a D700 and used the trial version of NX2 during the 60 day period. I found it was very
slow and crashed too much during use. But after knowing that I still had the impression that NX2 was needed so I
could change the camera controls after I shot. So I bought it off the Nikonmall website. I thought a physical
version would be sent and the key code was just temporary. But I guess the purchase was only for the key code to
unlock the trial version.[\quote]
With all do respect. You used the trial version, it didn't work as you would've liked it to, & you still bought
it. I fail to see how this is Nikon's fault. I don't know of any software company that does returns.
The file you DL'd for the trial version is exactly the same as the Full Version with all the features. The key
code just let's you use the software indefinitely. You can copy that file to any other computer & enter the key
code when it asks & use it on the new computer indefinitely.
-
I recently bought a D700 and used the trial version of NX2 during the 60 day period. I found it was very slow and crashed too much during use. But after knowing that I still had the impression that NX2 was needed so I could change the camera controls after I shot. So I bought it off the Nikonmall website. I thought a physical version would be sent and the key code was just temporary. But I guess the purchase was only for the key code to unlock the trial version.[\quote]
With all do respect. You used the trial version, it didn't work as you would've liked it to, & you still bought it. I fail to see how this is Nikon's fault. I don't know of any software company that does returns.
The file you DL'd for the trial version is exactly the same as the Full Version with all the features. The key code just let's you use the software indefinitely. You can copy that file to any other computer & enter the key code when it asks & use it on the new computer indefinitely.
-
Not sure how to create a hyperlink.Trying again.
-
If you are not in hurry for it, I would recommend this one. This is where I got mine for my Nikkor 18-200VR. It ships from overseas but it the best deal I found & I've purchased 3 times from them without any problem what so ever.
-
Wolverine makes some pretty good products. I've had a 40GB portable HD for a couple of years & haven't had any problems with it yet.
-
Capture NX
in Nikon
If anybody is interested, here is a link to Jason O'Dell's new book(PDF Download). I just got it & went through it quickly. I'd have to say, it's well worth the cost.
-
Capture NX
in Nikon
I've been using the new version NX2 to edit photos taken with my D80 & love it. What you are looking for is in the "Develop" area. This is open by default for me. Under "Camera settings", you'll find White Balance, Picture Control(Color Mode, Sharpening, Tone Compensation, & Saturation), & Noise Reduction. -
I don't know about vers. 1.4, but there is a vers. 1.3.2. These are the issues it fixes.
* Support for RAW images captured with the D60 has been added.
* When Exposure Compensation was adjusted from Base Adjustments > Exposure Compensation while Picture Control settings were applied from Base Adjustments > Camera Adjustments > Picture Control, the sharpening effect was cancelled. This issue has been resolved.
* When images captured with the D1 and an AI Fisheye Nikkor 16mm f/2.8D lens, "Fisheye Lens" could not be selected from Base Adjustments> Lens Adjustments. This issue has been resolved.
-
-
Terry Spade, I like both version that you did, but I really like the glamour shot! What did you use, if I may ask? Special software or plug-in?
-
-
Mirror Up mode question
in Nikon
Posted