pixseal
-
Posts
169 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by pixseal
-
-
<blockquote><I>Which setting is right for the 420ex's channel/group and the MR- 14ex's unknown buttons?</i></blockquote>
The correct channel setting is any one that's the same on both units.
-
No.
Canon makes an adapter to allow an older switch (RS-60T3) to operate an EOS-3.
-
<blockquote>You are going to have a very hard time finding an EOS adaptall mount. They do exist (I have one), but they didn't make them for long and they stopped making them maybe 10 years ago. </blockquote>
On the following web page <A HREF="http://www.a1.nl/phomepag/markerink/mounts.htm">http://www.a1.nl/phomepag/markerink/mounts.htm</A>:
<blockquote>Adaptal->EOS does exist, but it is no longer made, and rather hard to find. But a perfect alternative exists, much cheaper too: Adaptal->M42 plus M42->EOS....</blockquote>
-
The Quantum Turbo and Turbo Z should work for the 480EG. But the flash requires 270-300 volts from the power supply - are you prepared to "play" with that?
-
Two 550EX's will cost you (B&H prices, assuming both flashes are off-camera):<UL>
<LI>$500 540EZ (qty 2)
<LI>$ 60 Hot Shoe Adapter 3
<LI>$111 Connecting Cord 60 (qty 3)
<LI>$ 52 Off Camera Shoe (qty 2)
<LI>$ 45 Distributor
<LI>==================
<LI>$768 total pr. 540EZ
</UL>
Substitute a pair of 200E flashes for the 530EZ's:
<UL>
<LI>$500 less pr. 540EZ's
<LI>$110 add pr. 200E's
<LI>===================
<LI>$378 total pr. 200E
</UL>
And neither the 540EZ nor the 200E solution will give you the macro versatlity of the MR-24EX.
-
According to G2 user manual, the AC adapter can be used with power sources ranging from 100-240VAC, 50-60Hz. All you will need is an adapter for the different form factors.
BTW, the manual is downloadable (in PDF format) from www.powershot.com
-
More specifically:<BR>
1 ground<BR>
2 tip<BR>
3 ring<P>
1 + 3 = focus and meter<BR>
1 + 2 + 3 = shutter release
-
I have the information on my web age: <A HREF="http://www.kjsl.com/~dave/gr10.html">http://www.kjsl.com/~dave/gr10.html</A> (see "<I>Canon's 2.5mm plug standard is:</I>")
-
Lenses that I use with my D60:
<UL>Canon EF 100/2.8 Macro - my best macro lens
<LI>Canon EF 20-35/3.5-4.5 USM - my best wide angle lens
<LI>Canon EF 28-70/2.8L USM - my best portrait lens
<LI>Canon EF 28-135/3.5-5.6 USM - my best travel lens (and best bargain)
<LI>Canon EF 70-200/2.8L - my best long zoom lens (and most expensive)
<LI>Canon EF 50/1.8 - my fastest lens
<LI>Canon EF 50/2.5 Macro - my least favorite macro lens
<LI>Canon EF 300/4.0L IS USM - my best telephoto lens
<LI>Canon EF 1.4X Extender - my best teleconverter
<LI>Canon EF 2X Extender - my least favorite teleconverter
<LI>Zenit 16/2.8 Fisheye - my best fisheye lens
</UL>
...but I guess it really depends on what you like to shoot, right?
-
Figuring the pin-outs is simple - you can do no harm. Shorting the correct two pins simulates a partially pressed shutter button and shorting all 3 pins releases the shutter. There is no 4th (grounded) contact. ...now just find a 3rd party plug.... (BTW, the RS-80N3 typically sells for under $50 new)
-
"<I>My old 300TL with my T90 seemed to have been better also. Maybe I have a defective 550EX?</I>"<P>
If you still have your 300TL, try it on your EOS-3. It will work as well on your EOS-3 as it did on your T90. I suspect that the 550EX performance will improve with the use of high-output rechargeable batteries.
-
<<<second-hand information warning>>>
I was told (by the repair tech that fixed my RT) that the EOS-1 backlight requires a minor mechanical mod only (a tab removed) to fit.
-
Last month had my EOS RT (same basic body as the EOS 600/630) fixed for the problem that you described. The repair shop (<A HREF="http://www.horizon-electronics.com/">http://www.horizon-electronics.com/</a>) replaced the RT backlight panel with an EOS-1 panel - total cost, about $110. The tech told me that the EOS-1 panel needs a minor modification in order to fit into the RT.
-
$500 for a used body "with a bit of wear and tear" seems too high to
me - maybe $500 <I>with</I> the booster.
-
The "Remote Switch Adapter T3" that you bought accepts a 3/32" (2.5mm)
2-conductor plug - and that won't allow remote AF with your A2.
-
There is no need to put the flash into manual mode. Use Av, Tv or M
(camera manual) to get the shutter speed/aperture combination that you
want. (Av and Tv will expose the background correctly, in M mode
that's your responsibility). Using the 550EX in TTL mode, the camera
will control the flash duration to properly expose your nearby
subject. I suggest, however, that you set flash exposure compensation
(FEC) to -1/3 or -2/3.
-
There is a battery pack (BP-8) for the Rebel G that uses a AA cells.
However, there is no vertical grip available.
-
Yes, you can - I've used that exact combination (PB-E1 + NP-E1 + EOS
3) with no problems. The listing you saw (only for the EOS-1) was
dated - after all, the PB-E1 (and accessories) was officially
designated for the EOS 1N also.
-
<I>if you're interested in other nifty tricks you might consider
finding a Canon TC-80N3</I><P>
Unfortunately, the TC-80N3 has an "N3" plug and the T90 has a "T3"
socket. Canon makes a converter for a "T3" plug to "N3" socket, but
not the other way.
-
The BP-8 can be used on the Rebel XS (also, the X, G, 500 and 500N).
It uses 4 AA cells and mounts on the bottom of the camera.
-
-
Your camera backpack will count as your one piece of "carry-on"
luggage. (You may also bring aboard one "personal" item such as a
laptop computer or purse.) I've read others' encounters with airline
officials that insisted that the straps be stowed within the backpack
- I've always had mine stowed. ..and be sure not to carry any sharp
tools within.
-
The 28-135 IS is large and heavy... its main benefit over the
28-70/2.8L is price and additional focal length. See my <A
HREF="http://www.kjsl.com/~dave/lenstest/lenstest.html">web page</A>
-
I have such an adapter (Nikon-F lens to Canon-EF mount) that cost me
only $35. The difference in <A
HREF="http://www.a1.nl/phomepag/markerink/mounts.htm">mount register
depth</A> between Nikon (46.5 mm) and Canon EOS (44.0 mm) dictates a
rather thin adapter. Its simply a mechanical coupler to keep the
Nikon lens mounted to the camera body.
299T/300TL Flash external power connection
in Canon FD Mount
Posted
According to the <b><u>Canon Speedlite eference Guide</u></b> (Canon, 1991):<b><u></u></b>
<BLOCKQUOTE>
<p><b><u>Non-Canon External Batteries</u></b><b><i></i></b>
<p><b><i>Note: Canon does not officially recommend the use of non-Canon
accessories with Canon products. Canon is not responsible for damage to
your Speedlite caused by use of non-Canon accessories.</i></b>
<p>Many independent companies manufacture external power packs that can
be attached to Canon Speedlites like the 300TL, 420EZ, and 430EZ. These
power packs increase the number of flashes and reduce the recycling time
between flashes in much the same way as the Transistor Pack E. There are
essentially two types of external power packs: low voltage and high voltage,<u></u>
<p><u>1. Low Voltage Power Packs:</u> Low voltage packs supply 6 volts
and use a module that is placed in the Speedlite's battery compartment
as a replacement for the standard AA batteries. They achieve faster recycling
than alkaline batteries, typically 3-5 seconds for a full power recycle.
Some of the popular low voltage external battery packs include the Quantum
1 , the Quantum Bantam , the Underdog by JVB Designs , and
the Armato .Modules are available from Quantum and Armato for the 430EZ,
420EZ, and the 300TL.<i></i>
<p><i>Note: To avoid severe damage to the Speedlite, be sure to observe
the properpositioning or the power module in the Speedlite's battery compartment.
Evenwhen the module is correctly placed, avoid firing the Speedlite rapidly.
Heat can</i> <i>build up and cause damage to the Speedlite.</i><u></u>
<p><u>2. High Voltage Power Packs:</u> High voltage packs typically supply
320 to 330 volts, and must be wired directly to the main capacitor of the
Speedlite. Transistor Pack E, as mentioned above, is a high voltage
external pack. The 430EZ is the only Canon Speedlite that includes a specific
high voltage plug with appropriate circuitry built into the flash to handle
this power supply level.
<p>The Quantum Turbo is an independently made high voltage pack that
can be used with the 430EZ, in combination with the necessary Quantum connecting
cord. Full power recycle is achieved in 1 second, and the manufacturer
claims over 300 full power flashes per charge.<i></i>
<p><i>Note: Avoid firing the Speedlite rapidly. Heat can build up
and cause damage.</i>
</BLOCKQUOTE>