mehmet_konar_steenberg
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by mehmet_konar_steenberg
-
-
Bear in mind that the capacitors inside of flash units store up very large electric charges. These charges persist for a time even after batteries are removed. If you decide to open the unit, you run at least some risk of getting zapped if you don't know your way around. (Yes, this is personal experience speaking.)
-
Yes, I was able to have this repaired. It took two rounds of dealing with Pentax in Colorado. In both cases the repair slip indicated that they replaced the "sensor and/or circuit board." It's been fine since the second repair (several months now).
-
Hello. My new K100D Super has developed a weird yellow horizontal banding
problem at ISO 800, 1600, and 3200. Please not that this is NOT the dark
vertical banding others have written about. Instead, it is a set of two and
sometimes more yellowish horizontal bands that are always in the same place in
the frame.
A review of my first photos with this camera from a couple of weeks ago
indicates that this problem did not exist when the camera was new. It seems to
have cropped up just in the last two days.
I've emailed Pentax, but in the meantime, any thoughts about what's going on?
Bad sensor maybe? I only shoot in RAW, for whatever that may be worth.
I've attached a sample photo. You can see the bands clearly against the dark
background of the seated man's shirt.
-
The decisive moment, indeed.
-
File under beginner: I just got a Yashicamat EM and I am having
trouble understanding how to reset the film counter to the beginning
("S"). Actually, I can do this manually---i.e., I can open the back,
take out the old roll of film, and then laboriously turn the chrome
serated wheel to dial the exposure counter back through 12, 11,
10, . . . 2, 1, . . . S. But I can't believe that this is the way
Yashica intended me to accomplish this. FWIW, when I crank forward
at the end of the roll, it goes to the end-of-roll indicator and just
stays there. Is there something else I'm supposed to do to reset the
counter? Your assistance will be greatly appreciated.
Water spilled on 16-45 DA
in Pentax
Posted