poulbh
-
Posts
357 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by poulbh
-
-
<p>NEVER use acetone or thinner, it dissolves plastic!!</p>
-
<p>On other types of equipment I have had success with removing stuff like that by removing the biggest lumps with nails or a credit card and then a lot of polishing with alcohol or white gas. It can look quite nice underneath. But printed matter on the rubber, will of course also disappear.</p>
-
<p>You changed position between the photos. Is the ceiling darker in the middle of the room, or is it much higher?</p>
-
<p>I have two cards and I can see they are called Red and Orange, so I must have named them when I created them.<br />My cards are matched to the EyeFi program in my PC, that I used for configuration.<br /><br /></p>
-
<p>I just bought a Sigma 150-600mm C. I think and also according to reviews, that this is where you get most out of your money. It costs below 1000$</p>
<blockquote>
<p>The Sigma 150-600 Contemporary is a very good lens, with an outstanding performance to dollar ratio, and the build quality feels excellent. It's a great bargain, given both its versatility and the prices for the alternatives from the major manufacturers. While image quality isn't super tack sharp, especially at 500-600mm (and the corners aren't as crisp on full-frame cameras), if you factor in all the cash left in your bank account as opposed to purchasing a 500mm or 600mm prime lens or something like the Canon 200-400mm f/4 lens, you'll be thoroughly impressed and chuckling all the way to the bank.<br /><br />http://www.imaging-resource.com/news/2015/03/30/sigma-150-600mm-contemporary-lens-review</p>
</blockquote>
-
<p>Even if you have 30.000$ "Due to the specialist nature and demand for this product, the ME20F-SH will only be available to selected partners."</p>
-
<p>There definitely is a battery in the sender. Its also obvious, as there is an LED on it. It should light green when you push the grey button halfways and red when fully.. <br />Sorry, I can't be bothered to take mine apart, you'll have to open yours to find out what battery it uses ;-)<br /> The button on the receiver(square device) is the on/off and the right LED should come on. The left LED goes green when the button on the sender is half pressed and red when fully pressed.<br /> The unit works flawlessly and the batteries last for ever.<br /> I'm afraid a unit using AA batteries would be rather clumsy.</p>
-
<p>When trying out converters make sure they are compatible mechanically as well. With some combinations you can have the lens extending into the converter, when zooming or focusing! ! !</p>
-
<p>EOS5 with eye controlled focus and settable DOF just by focusing and clicking</p>
-
<p>I had something coming loose on the front but just clicked it back together.</p>
-
<p>I went to storing my camera horizontally in he bag, after a bustrip through Malaysia, with the camera and lens stored vertically.<br>
I don't remember dropping the bag but when arriving, I found the filterglas broken and the filter stuck to the lens. The lens was stuck to the housing.<br>
I got the filter off with a plyer and after trying cautiously to unscrew the lens by hand a lot of times, I got desperate and used a lot of force and got the lens off. It was somehow turned further in than normal.</p>
<p>The lens and camera are still working today.</p>
-
<p>It worked ok untill I pulled the camera up and down the bag, then the white rubberbands rolled off. I have now installed the Lensband slightly ovverlapping the stationary part and it adds nice friction.</p>
-
<p>I had a slight creep on my 24-105, so I moved the original rubber ring up and put two rubberbands below it in the groove, to keep it in place and it works.<br>
I did however order the Lensband from the link but didn't receive it yet.<br>
<img src="https://lh3.googleusercontent.com/-hT5nTdPfKdw/UdlH7sqoHGI/AAAAAAAAC28/SeIQo5ZKeZ8/w1000-h599-no/2013-07-07+12.44.31a.jpg" alt="" width="1000" height="599" /></p>
-
<p>There are many uncertainties connected with 3. party chargers, so I chose original.<br /> The charger must have 4 pin connection, or it won't charge original cannon batteries. Even if it has 4 pins, it might not charge original batteries. Canon batteries have built in electronics, that is used by the charger.</p>
<p><br /> Canon batteries might deteriorate faster if not charged with an original charger.</p>
<p><br /> You might be able to pick up a used as thats what people have left, when their camera gets stolen. I have a charger for the 5D because of that.</p>
-
<p>I got some cheap batteries for my 5D and the worked perfectly.<br>
I always charge my batteries about once month and after 1/2 year I was going on a 2 month trip to South East Asia and put one of the cheap batteries in the camera to test some settings and it ran out within 10 minutes. I tested all of the others (6 batteries) and only the original Canon batteries had maintaned their capacity.<br>
Luckily my son had the same camera, so I met up with him at the airport and borrowed 2 original batteries from him.<br>
I now only buy original batteries.<br>
PS: I also bought a chinese adjustable charger to be able to emergency charge batteries in my car. It worked perfectly but just stopped working after a year</p>
-
<p>I use a Mirex adapter and Mamiya lenses <a href="../canon-eos-digital-camera-forum/00WaiF">http://www.photo.net/canon-eos-digital-camera-forum/00WaiF</a></p>
-
<p>I had the same problem without the grip. I tried both Canon and third party</p>
-
<p>I tried a lot but only after inserting both fully charged batteries, the camera started responding and after that also with one battery !</p>
-
<p>I accidentially changed battery with the ON switch on. It worked a few times, then suddenly the camera won't come on. It doesn't give the little blink when inserting a battery.</p>
-
<p>Be aware that most if not all, these experiencies are with the Mk I or II, but Canon has launched Mk III extenders that get better reviews than the previous ones.<br>
-
<p>You could go for a 77mm to 67mm ring, then you only have to buy the 77mm filters. But you'll then have to unscrew/screw you filter every time you change lens.<br>
On the 17-40 you need special narrow filters or you'll get vignetting at the 17 end.<br>
Consider if you really want a polariser for the 17-40 as it won't work over the whole picture, so the sky will change from darker to lighter.<br>
Polarisers only work at a certain degree with respect to the sun and the 17-40 covers a bigger range at 17mm.<br>
That said, I kind of like my Himalaya pictures with a changing sky.<br>
Cokin is especially good if you use ND grad filters, as you can pull them up and down and tilt them but they are a pain to use in the field, the frame sticks out and is cheap plastic, the filters are plastic and scratch easily in the pocket.<br>
PS: protection or UV filters should be on every lens all the time, I once had a zipper from my bag scratch a 70-200mm just when I opened the bag, the puller fell on an unprotected lens.<br>
Years ago a 10-300mm crashed into the ground, sitting on my EOS5 (while in China) and I only had to use some force to remove the filter and straighten a slight bend in the filter threads on the lens and it could accept a filter again and worked flawlessly.</p>
-
<p>I think I read on Bluemoons homepage that their BW fotos have a "warm brown color" so its in their development</p>
-
<p>Hello Ian<br>
When the original 27PX in mercury was discontinued, Minox made a cap with a sleeve, which is probably the one you have. In that, you can also use 4xLR43s.<br>
To use a silver 27PX or mercury, you need the original cap. You can maybe buy a Minox35 on ebay for around 10$ and ask them to just send the cap.<br>
PS: I still have original mercury 27PXs</p>
-
<p>I don't know why Martin Tais thread disappeared but here is the link again<br>
http://www.minox.com/index.php?id=4069&L=1<br>
<img src="http://www.payworxx.de/minox/images/product_images/popup_images/493_1.jpg" alt="" width="600" height="259" /></p>
<p><strong>Technical data MINOX DSC Digital Spy Camera Silver - the next Spy Generation</strong></p>
<table border="0" cellspacing="2" cellpadding="2">
<tbody>
<tr>
<td >Image sensor</td>
<td >5,1 MP, CMOS Sensor</td>
</tr>
<tr>
<td >Image resolution</td>
<td >Still: 2.608 x 1.956 pixels <br />Videoclip: 640 x 480 pixels</td>
</tr>
<tr>
<td >Memory</td>
<td >Internal: 128 MB NAND Flash memory<br />External: optional mircro SD card up to 16 GB</td>
</tr>
<tr>
<td >Viewfinder</td>
<td>Optical (Galileian-Style)</td>
</tr>
<tr>
<td >Display</td>
<td >1,5" TFT LCD display (integrated in DSC <br />Flash module)</td>
</tr>
<tr>
<td >Flash</td>
<td>DSC with LED Flash<br />DSC Flash: electronic flash</td>
</tr>
<tr>
<td >Lens</td>
<td >Minoctar lens / lens with IR filter</td>
</tr>
<tr>
<td >Focal length</td>
<td>9,0 mm (corresponds to approx. 42 mm<br />with 35 mm format)</td>
</tr>
<tr>
<td >Lens aperture</td>
<td >F 2.0</td>
</tr>
<tr>
<td >Focus range</td>
<td>Manual focus: 0,6m, 1,1m, infinity</td>
</tr>
<tr>
<td >White balance</td>
<td >Automatic</td>
</tr>
<tr>
<td >Shutter speed</td>
<td>Automatic</td>
</tr>
<tr>
<td >Power supply</td>
<td >Rechargeable Lithium-Polymer-Battery <br />USB-cable</td>
</tr>
<tr>
<td >Auto power-off</td>
<td>OFF-Mode after 1 min. inactivity</td>
</tr>
<tr>
<td >File format</td>
<td >Still: JPEG<br />Videoclips: AVI</td>
</tr>
<tr>
<td >System Requirements</td>
<td><b>PC</b> Microsoft Windows ME/2000/XP/Vista<br />Intel Pentium III, 450 MHz or higher<br />128 MB RAM (recommended)<br />USB 2.0 High Speed<br />800 MB free hard disc space<br />Internet Connection<br /><b>Mac </b>Mac OS 9; Mac OS X 10.x<br />500 MHz Power PC G3 or higher<br />128 MB RAM (recommended)<br />USB 2.0 High Speed <br />800 MB free hard disc space<br />Internet Connection</td>
</tr>
<tr>
<td >Computer interface</td>
<td >mini USB-cable (USB 2.0 high speed)</td>
</tr>
<tr>
<td >Dimensions</td>
<td>DSC:86mm(W) x 30mm(L) x 21mm (H)<br />DSC Flash: 91mm(W) x 41mm(L) x 21mm (H)</td>
</tr>
<tr>
<td >Weight</td>
<td >DSC: approx. 90g<br />DSC Flash: approx. 80g</td>
</tr>
<tr>
<td >Scope of delivery</td>
<td>DSC, flash/display-unit, lithium-ion-battery for DSC and flash/display-unit, chain, mini USB-cable, USB-cable for recharging flash/display-unit, carrying case</td>
</tr>
<tr bgcolor="#efefef">
<td >Order-No.</td>
<td>60666</td>
</tr>
</tbody>
</table>
85 1.2L Mk1 with "melting" rubber paint
in Canon EOS Mount
Posted
<blockquote>
<p>Or sunscreen or mosquito repellent?</p>
</blockquote>
<p>Very likely but it happens anyway. I'm in temperate Denmark and it happened to my keyboard and mouse. I think the softening agent in the "rubber" paint breaks down and dissolves the "rubber"<br>
</p>