michel_carr_re_g_e
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Downloads
Gallery
Store
Posts posted by michel_carr_re_g_e
-
-
<p>Good morning.<br />I bought a Minox exposure meter down (not Minosix).<br />I unscrewed the only visible screw but I can not open it.<br />Any ideas to open?<br /><br />Michel</p>
-
" Yep, the AsahiFlex used a Leica thread lens mount, ....".
NO !: Leica mount is 39mm, "standard" mount is 42mm and Asahiflex is 37mm
-
See:
English: http://kmp.bdimitrov.de/technology/K-mount/Ka.html
French: http://perso.wanadoo.fr/krg/pentax/multizone.htm
The 1.2/50mm code is 111*11; all pin contact aren grounded.
Is special notice for this lens in owner manual (p117)
Michel
-
http://perso.wanadoo.fr/krg/trucs/reparations.htm#semelle
Translation by "Babelfish"
To repair the sole of Z1
The sole of Pentax Z1 (Z1p too?) have a weakness: it happens that the material cracks or breaks close of the one of the two screws located beside the trap door of the pile; in is this place the thickness of plastic reduced and the screws (too much tight?) exert an important constraint.
- this plastic is stuck very well with an adhesive to the cyanoacrylate (Cyanolit kind).
- to stick the sole directly will irremediably stick it to the case and risk to make it irrevocable.
- it is thus necessary imperatively to deposit the sole of the case, which does not raise a difficulty.
- to get a miniature screwdriver adapted under penalty of damaging the screws.
- to pose the case with back on a clean surface and to fix it well.
- to unscrew the fastening screws attention not to lose them, the sole comes easily, to uncouple the trap door of the pile.
- now to stick the break, to take care to make penetrate the adhesive (enough fluid) in the slit.
to wipe the traces of adhesive, to let dry, check joining, to scrape or file the possible burs.
- to go up: the trap door, the sole, screws.
Minox exposure meter
in Minox/Miniature
Posted