shootme

I just got a Super multicoated Takumar 50 mm F1.4 lens and discovered there was fungus inside, so I had to take it apart to clean it. I removed the whole front assembly and made sure to mark the group to align it with infinity when I put it back together. But, after reassembling the lens, it wouldn't focus and the front element was protruding forward a bit. I also removed the focusing ring and I think I may have accidentally moved the focusing mechanism. I recorded a short video and took a photo of what I did I have made a very short video of what I did, along with a photo. I am very frustrated. ¿Could anyone tell me what I did wrong? Thanks in advance Here is the link to the video: https://youtu.be/JzuqTMhl2nQ and photo: https://flic.kr/p/2orycwm

It is and this is It is updated to the latest firmware. THIS IS REPLY FROM FRINGER CUST SERV: Fringer <fringer@fringeradapter.com> 1:29 PM (7 hours ago) to me Hi, I'm not aware of this problem. We didn't get similar complains from other users. And it shouldn't happen theoretically. But currently we don't have a XE1 to do tests. Please wait for us to find one. Thanks. 在 19/7/13 13:26，“walter iglesias”<walteriglesias@gmail.com> 写入: Hello, My adapter does work on my XT30, but my XE1 stops working and freezes with it. I updated to the latest firmware but it did not solve the problem. Can you help? Thank you,

When I put this adapter on the camera coupled with a Canon EF lens, the camera freezes or goes bunkers. With the XT30 it works fine. I have tried with the non-pro firmware and version 1 also. It appears version 1 works better but the camera still freezes. I tried many different lenses too. Any trick that might help? Thank you,

Thank you all for your responses. I will keep ypu guys posted of my results.

Thank you. I am aware of the incompatibility issue with modern Nikons. My question however is about a good af confirming adapter for Canon EOS. I do appreciate your responses.

Thank you kindly Wouter.

An uncle gave me these lenses. I don't know much about Nikon and would love to use them with my Canons. Is there a decent not expensive adapter you would recommend? lenses have not been modified at all. Nikkor s.c Auto f1.4 50mm Nikkor P Auto f2.5 105mm Micro-Nikkor-P Auto f3.5 55mm Thank you in advance. Warm hugs,

<p>I got it, thank you kindly. I will try it right now.</p>

<p>I would appreciate it very much if anyone could send me the Firmware v1.06 for the YN-622C-TX.<br> I updated the firmware and it stopped working , I am not sure it's the firmware though.<br /><br> This is my email: iglesias2011-foto2@yahoo.com<br /><br> Thank you.<br /></p>

<p>I wonder whats the use of the 50 MP without lenses to at least match the sensor resolution.</p>

<p>I have a YN-622C-TX, all works fine but the AF assist beam. I have tried to activate it by long pressing the SYNC/FN button going to the third option and selecting on, but no luck. I have also activated the AF assist beam on two different Canon bodies and nothing.<br> Also I have four YN-622C and the beam works fine in all of them.<br /><br />Is it me or the AF assist beam does not work?<br /><br />Thank you kindly in advance for your time and expertise,<br /><br />Walter.</p>

<p>Thank you Dan.</p>

I just installed it. Thank you for your help.